21628676 Cable | Genuine Volvo Penta Part

🔧 Product Description

A factory-terminated cable used in the designated Volvo Penta electrical, EVC or equipment-control system.

🚤 Compatibility

Typically suits:

• Volvo Penta D5A-B TA
• Volvo Penta D5A-T
• Volvo Penta D7A-B TA
• Volvo Penta D7A-T
• Volvo Penta D7A-TA
• Volvo Penta D7C-B TA
• Volvo Penta D7C-TA
• Volvo Penta TAD620VE
• Volvo Penta TAD720VE
• Volvo Penta TAD721VE
• Volvo Penta TAD722VE
• Volvo Penta TAD520VE

• Engine Family: D, TAD

⚙️ Key Features

• OEM connector and terminal arrangement
• Marine and engine-room-rated insulation
• Correct factory cable length
• Carries power, communication or control signals
• Designed for the assigned routing and strain relief

🔌 Function

The cable connects compatible control-system components and transfers the required electrical or communication signals.

⚠️ Common Signs of Failure

• Intermittent communication
• Controlled function not responding
• Corroded or bent connector pins
• Chafed insulation

🛠️ Service Notes

• Isolate the battery before disconnecting or reconnecting anything, and make sure connectors are clean, dry and fully latched before switching the system back on
• Route the new cable along the original path and secure it with the original clips, ties and stand-offs; unsupported cable chafes through wherever it touches a bracket, hose or edge
• Keep the run clear of the exhaust and turbocharger, away from moving parts and sharp edges, and use a grommet or gland wherever it passes through a panel or bulkhead
• Protect the connections against damp — a properly seated and sealed connector survives an engine bilge atmosphere far better than a taped joint
• Replace a damaged cable rather than patching it; where a repair is unavoidable use a crimped and sealed joint, never solder as the only mechanical connection

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging