• 21637990 Bracket | Genuine Volvo Penta Part
  • 21637990 Bracket | Genuine Volvo Penta Part - photo 2 of 2
1 2

21637990 Bracket | Genuine Volvo Penta Part

21637990 Bracket | Genuine Volvo Penta Part

$705.18 AUD
$705.18 AUD
Sale Sold out
Shipping calculated at checkout.

Available from Volvo Penta international

Typically reaches our store in 10–14 business days

Availability checked daily with Volvo Penta

✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide

🔧 Product Description

A genuine mounting bracket used in the ignition and control-system arrangement on Volvo Penta TAD540-42VE industrial engines. It supports the engine control panel and associated wiring while isolating the electronics from excessive vibration.

🚤 Compatibility

Typically suits:

  • Volvo Penta TAD840GE
  • Volvo Penta TAD552VE
  • Volvo Penta TAD853VE
  • Volvo Penta TAD880-82GE
  • Volvo Penta TAD880-84VE
  • Volvo Penta TAD580-83VE
  • Volvo Penta TAD570-72VE
  • Volvo Penta TAD570-71VE-B
  • Volvo Penta TAD550-51VE
  • Volvo Penta TAD540-42VE
  • Volvo Penta TAD840-43VE
  • Volvo Penta TAD850-52VE
  • Volvo Penta TAD870-73VE
  • Volvo Penta TADH880-82GE
  • Volvo Penta TADH880-84VE
  • Engine Family: TAD, TADH
  • HP Range: Approximately 160-250 HP
  • Year Range: Approximately 2010 - 2021

⚙️ Key Features

  • Genuine Volvo Penta control-panel bracket
  • Specified for TAD540-42VE electrical systems
  • Factory panel and fastener alignment
  • Used with vibration-damping components
  • Direct replacement for a damaged or corroded original bracket
  • Engine type: 5.1L inline four-cylinder turbocharged industrial diesel

🔌 Function

Holds the engine control panel and wiring in the designed position and limits vibration transfer into the electronic components.

⚠️ Common Signs of Failure

  • Control panel movement or rattling
  • Wiring chafing or connector strain
  • Failed vibration isolators
  • Intermittent electrical faults after bracket movement

🛠️ Service Notes

  • Offer the bracket up and start every fastener by hand before tightening any of them, so the component is not pulled into a strained position
  • Check the mating faces are clean, flat and free of corrosion scale — a bracket that does not sit flat will work loose and let the component move
  • Renew self-locking nuts, lock washers, tab washers or thread-locking compound wherever the original assembly used them, and tighten to the figure given in the workshop manual for your engine
  • Where the bracket carries a rubber mount or bush, renew that at the same time rather than reusing a perished one
  • On brackets in the inlet and exhaust area, never force alignment to make the holes line up — cure the misalignment at its source, or the bracket and the component it holds will both crack

🔄 Supersession & Cross Reference

OEM / Related Numbers

  • 21898783 - control panel
  • 3587268 - programming references
  • 3587269 - programming references
  • 996061 - mounting screw
  • 21732331 - companion bracket
  • 3574797 - vibration damper
  • 990939 - nut
  • 21904841 - cover
  • 984754 - flange screw
  • 21930864 - wiring harness
  • 948211 - cable tie

📦 Condition

  • Genuine Volvo Penta part
  • Brand new
  • Supplied in original or equivalent packaging

Shipping & Delivery

Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.

Returns & Warranty

14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.

Not sure this fits?

Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.

View full details