1
/
of
1
21717705 Gasket | Genuine Volvo Penta Part
21717705 Gasket | Genuine Volvo Penta Part
Regular price
$19.77 AUD
Regular price
Sale price
$19.77 AUD
Shipping calculated at checkout.
Quantity
Couldn't load pickup availability
🔧 Product Description
A genuine Volvo Penta gasket used in Volvo Penta D17 upper-engine and valve-cover assemblies. It is manufactured to the factory dimensions and operating specification for the catalogued installation.
🚤 Compatibility
Typically suits:
- Volvo Penta V8-380-CE-A
- Volvo Penta V8-380-C-B
- Volvo Penta V8-380-CE-B
- Volvo Penta V8-380-C-D
- Volvo Penta V8-380-CE-D
- Volvo Penta V8-430-CE-D
- Volvo Penta V8-350-C-D
- Volvo Penta V8-350-CE-D
- Volvo Penta V8-380-C-A
- Engine Family: V
- HP Range: 350-430 HP
⚙️ Key Features
- Factory sealing profile and material
- Designed for the applicable oil, coolant, air or exhaust environment
- Maintains system pressure and fluid separation
- Single-use replacement where the joint is disturbed
- Correct dimensions for the catalogued mating components
- Engine type: Volvo Penta D17 inline six-cylinder turbocharged diesel
- 4 used per assembly
🔌 Function
A precision sealing component that prevents fluid, gas or pressure leakage at the specified joint.
⚠️ Common Signs of Failure
- Fluid or gas seepage at the joint
- Seal hardening, flattening or cracking
- Contamination between adjoining circuits
🛠️ Service Notes
- Fit a new gasket every time the joint is disturbed — a gasket takes a permanent set once it has been torqued and will not seal reliably a second time
- Scrape both faces back to clean bare metal, keeping the blade at a shallow angle so it lifts the old material without gouging the surface, and use a plastic scraper on aluminium castings
- Check the faces for flatness, cracks and corrosion pitting, and make sure no old gasket, carbon or hardened sealant is left in the corners or around the bolt holes
- Fit the gasket dry unless the workshop manual for your engine calls for a sealant, and then only the type it specifies — surplus sealant squeezes out into oil, coolant and fuel passages
- Draw the fasteners down progressively in the sequence and to the torque given in the manual for your engine, and recheck after the first heat cycle where the manual asks for it
📦 Condition
- Genuine Volvo Penta part
- Brand new
- Supplied in original or equivalent packaging
Share
