21730348 Impeller Kit | Genuine Volvo Penta Part
21730348 Impeller Kit | Genuine Volvo Penta Part
Couldn't load pickup availability
🔧 Product Description
Genuine Volvo Penta D9 / D11 Raw-Water Pump Impeller Kit - Part Number: 21730348
A genuine Volvo Penta flexible raw-water impeller kit used on selected D9, D11 and related high-flow marine cooling pumps. The impeller is approximately 65mm in diameter, 76.2mm wide and uses a 16mm seven-spline hub.
Kit Contents:
• 1 x eight-blade flexible impeller - Volvo Penta 21730348
• 1 x O-ring - aftermarket JMP reference ORG0067 where kit 7446-01K is used
• 1 x O-ring - aftermarket JMP reference ORG0071 where kit 7446-01K is used
• Genuine package sealing content can vary by pump; verify the pump-cover diagram
⚙️ Key Features
• Approximately 65mm diameter and 76.2mm width
• 16mm seven-spline hub
• Eight flexible blades
• Cross-references earlier Volvo impeller numbers
• Jabsco and JMP equivalents available
🔄 Supersession & Cross Reference
OEM Supersession Chain:
• 21730348 cross-references Volvo Penta 3817587, 3593573, 3583602 and 3819486 where specified
OEM / Related Numbers:
• 21730348
• 3817587
• 3593573
• 3583602
• 3819486
Aftermarket / Verified Equivalents:
• Jabsco: 17018-0001
• JMP: 7446-01K
• JMP impeller: 7446-01
• Caterpillar: 3N5895 cross reference
🚤 Compatibility
Commonly used on:
• D9 / D11 raw-water pump servicing
• Annual impeller replacement
• High-flow marine cooling maintenance
Typically suits:
• Engine models / drive models:
• D9A2A through D9A2F marine applications using the matching pump
• D11A / D11B / D11C marine applications using the matching pump
• Selected early D6 applications where the pump diagram specifies 21730348
• HP Range: Not horsepower-specific
• Engine Type: Volvo Penta D9 / D11 marine diesel raw-water cooling system
• Year Range: Approximately 2000s onward
• Serial Range: Raw-water pump and spline controlled; verify the 65 x 76.2mm, seven-spline impeller before ordering
🔌 Function
The flexible impeller supplies raw-water flow to the engine heat exchanger, charge-air cooler and wet exhaust.
Common signs replacement or overhaul is required:
• Raw-water flow is reduced
• Engine or charge-air temperature rises
• Impeller blades are cracked or missing
• Pump has been opened after a dry-run event
• Scheduled annual replacement is due
📦 Condition
• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging
Share
