21806510 Lifting Eye | Genuine Volvo Penta Part

🔧 Product Description

Engine lifting eye used at the specified D3-110I-F cylinder-head lifting point. It is intended for workshop lifting procedures only and must be installed with the correct fasteners and torque before load is applied.

🚤 Compatibility

• Engine Family: D
• HP Range: 110-220 HP

Full model list at the end of this description.

⚙️ Key Features

• Application-specific lifting geometry
• Designed for the specified engine attachment point
• High-strength construction
• Requires correct fasteners and torque
• Not a general-purpose towing point

🔌 Function

Provides a controlled attachment point for lifting the engine or designated component during service.

⚠️ Common Signs of Failure

• Cracks, bending or elongation
• Damaged threads or bolt holes
• Evidence of overload
• Loose or incorrect mounting hardware

🛠️ Service Notes

• Fit lifting eyes only to the mounting points the workshop manual for your engine nominates, using the correct grade of bolt tightened to the figure the manual gives, with the thread fully engaged in sound metal
• Use all the eyes the lifting arrangement calls for at once and rig so the pull is vertical; a sling angle that drags sideways on an eye loads it in a direction it was never designed for
• Check that nothing fouls the slings, take the strain gradually, and stop to check the rig again before the engine lifts clear
• Inspect before every lift and reject any eye that is cracked, bent, worn thin where the sling bears, or has an elongated hole — a lifting eye is a safety component and is not repairable
• Lift only what the eyes are rated for: engine lifting eyes are not intended for the engine complete with gearbox, drive or ancillaries unless the manual for your engine says they are

🔄 Supersession & Cross Reference

OEM Supersession Chain

• 21806510 → Supersedes 21377354 → Supersedes 21146445

OEM / Related Numbers

• 21377354 earlier number superseded by this part
• 21146445 earlier number superseded by this part
• Use with the cylinder-head lifting points shown for D3-110I-F; lifting hardware and load rating must match the workshop procedure

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta D3-220I-G, D3-140A-D, D3-170A-D, D3-200A-D, D3-220A-D, D3-140I-D, D3-140A-E, D3-170A-E, D3-200A-E, D3-220A-E, D3-140I-E, D3-140A-F, D3-170A-F, D3-200A-F, D3-220A-F, D3-140I-F, D3-140A-G, D3-170A-G, D3-200A-G, D3-220A-G, D3-140I-G, D3-110I-A, D3-110I-D, D3-150I-D, D3-170I-D, D3-200I-D, D3-220I-D, D3-110I-E, D3-150I-E, D3-170I-E, D3-200I-E, D3-220I-E, D3-110I-F, D3-150I-F, D3-170I-F, D3-200I-F, D3-220I-F, D3-110I-G, D3-150I-G, D3-170I-G, D3-200I-G, D3-110I-H, D3-140A-H, D3-170A-H, D3-200A-H, D3-220A-H, D3-150I-H, D3-170I-H, D3-200I-H, D3-220I-H, D3-140I-H