21831660 Turbocharger | Genuine Volvo Penta Part
21831660 Turbocharger | Genuine Volvo Penta Part
Couldn't load pickup availability
Available from Volvo Penta international
Typically reaches our store in 10–14 business days
Availability checked daily with Volvo Penta
✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide
🔧 Product Description
Genuine Volvo Penta turbocharger supplied to the Holset HE400WG / 4031211H specification for TAD1140-TAD1142VE engines. The wastegated unit includes the matched actuator and must be installed with clean oil feed/return lines, correct gaskets and a verified intake/exhaust system.
🚤 Compatibility
Typically suits:
- Volvo Penta TAD1170-72VE
- Volvo Penta TAD1150-52VE
- Volvo Penta TAD1140-42VE
- Engine Family: TAD
⚙️ Key Features
- Engine-specific compressor and turbine match
- Wastegate / actuator calibration where fitted
- Oil-lubricated high-speed bearing system
- Factory flange and housing orientation
- Intake, exhaust and lubrication systems must be verified
🔌 Function
Uses exhaust-gas energy to compress intake air, increasing engine airflow, torque and power.
⚠️ Common Signs of Failure
- Loss of boost or engine power
- Excessive smoke or oil consumption
- Siren, scraping or bearing noise
- Compressor / turbine wheel contact
- Oil leakage into intake or exhaust
🛠️ Service Notes
- Find and fix the cause before fitting a replacement — a restricted air intake, a dirty or partly blocked oil feed, a poor oil drain or debris loose in the exhaust will destroy the new turbocharger as quickly as it did the old one
- Renew or thoroughly flush the oil feed and drain lines, fit new sealing washers and gaskets, and change the engine oil and filter at the same time
- Prime the bearing housing with clean engine oil through the feed connection while turning the compressor wheel by hand, before the feed pipe is connected
- Check both wheels spin freely without touching their housings, and that the inlet and exhaust joints are clean and true so nothing can be drawn or blown through
- After starting, let the engine idle so oil reaches the bearings before any load is applied, and idle it again to cool the bearings before shutting down after a hard run
🔄 Supersession & Cross Reference
OEM Supersession Chain
- 21831660 → Volvo Penta remanufactured replacement reference 3801560
OEM / Related Numbers
- 21831612 - oil-return pipe
- 21867994 - pressure hose
- 22281111 - exhaust manifold
- 20781146 - related gaskets
- 22206133 - related gaskets
- 20707685 - related gaskets
Other-Brand OEM Numbers
- Holset / Cummins Turbo Technologies HE400WG
- Holset 4031211H / 4031211
- Holset 3792723 / 3792725 / 6457063 / 6622266 - manufacturer cross-reference numbers; actuator and calibration must match
OEM Reman Alternatives
- 3801560 - Volvo Penta remanufactured turbocharger
📦 Condition
- Genuine Volvo Penta part
- Brand new
- Supplied in original or equivalent packaging
Shipping & Delivery
Shipping & Delivery
Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.
Returns & Warranty
Returns & Warranty
14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.
Not sure this fits?
Not sure this fits?
Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.
Share
