21883682 Screw | Genuine Volvo Penta Part
21883682 Screw | Genuine Volvo Penta Part
Couldn't load pickup availability
Available on request — contact us
As an authorised Volvo Penta dealer we can source parts through channels not shown online, and check supersession and used options for you
Availability checked daily with Volvo Penta
β Authorised Volvo Penta Dealer Β· Genuine Volvo Penta parts Β· Ships Australia-wide
π§ Product Description
This genuine Volvo Penta v8 engine retaining screw is specified for the GM Gen IV V8 engine assembly. The thread, length, strength class and installed position must match the original fastener.
π€ Compatibility
Typically suits:
- Volvo Penta V8-380-CE-A
- Volvo Penta V8-380-C-B
- Volvo Penta V8-380-CE-B
- Volvo Penta V8-380-C-D
- Volvo Penta V8-380-CE-D
- Volvo Penta V8-430-CE-D
- Volvo Penta V8-350-C-D
- Volvo Penta V8-350-CE-D
- Volvo Penta V8-380-C-A
- Engine Family: V
- HP Range: 350-430 HP
- Year Range: approximately 2012-2016
βοΈ Key Features
- Engine retaining screw for the GM Gen IV V8 assembly
- 0.079 kg
- Listed for 9 applications in the V petrol range
- Thread, length, strength class and installed position must match the original fastener
π Function
Clamps its joint at the designed load, holding the retained component against the engine so the joint does not work loose under vibration.
β οΈ Common Signs of Failure
- Component loose or the joint weeping where it should be clamped
- Knock or rattle from the joint under load
- Head drive rounded or burred on removal
- Thread stretched, galled or the screw necked down
- Screw corroded or seized into its hole
π οΈ Service Notes
- Clean the threads in the casting and check them for damage before fitting; a screw run into a dirty or pulled thread gives a false torque reading and will not hold its load
- Tighten to the torque given in the workshop manual for your engine rather than by feel, and follow the specified sequence where the joint has one
- Use the thread locking or sealing compound the manual calls for at that joint β some screws pass into oil, coolant or fuel space and have to seal as well as clamp
- Renew any screw that is stretched, corroded in the shank, or has damaged threads or a rounded head, and never reuse one that was tightened by a stretch or angle-tighten procedure
- A little marine-grade anti-seize helps later removal where the manual permits it, but keep it off threads that are meant to take a locking compound
π Supersession & Cross Reference
Other-Brand OEM Numbers
- VOE21883682
π¦ Condition
- Genuine Volvo Penta part
- Brand new
- Supplied in original or equivalent packaging
Shipping & Delivery
Shipping & Delivery
Flat-rate shipping Australia-wide β $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.
Returns & Warranty
Returns & Warranty
14-day change-of-mind returns β if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.
Not sure this fits?
Not sure this fits?
Ask us before you buy β we check part numbers and fitment every day. Call 0412 532 984 (MonβFri 8.30amβ4.30pm) or message us through the contact page with your engine or vehicle details.
Share
