21887206 Hose Clamp | Genuine Volvo Penta Part

🔧 Product Description

This genuine Volvo Penta hose clamp secures the breather hose in the closed crankcase-ventilation system.

🚤 Compatibility

Typically suits:

• Volvo Penta TAD734GE
• Volvo Penta TAD750GE
• Volvo Penta TAD751GE
• Volvo Penta TAD752GE
• Volvo Penta TAD753GE
• Volvo Penta TAD754GE

• Engine Family: TAD

⚙️ Key Features

• Closed-breather hose retention
• Factory clamp diameter and tension
• Oil- and heat-resistant finish
• Prevents hose movement and vapour leakage
• Inspect during breather service

🔌 Function

Secures the crankcase-breather hose to its pipe or oil-separator connection.

⚠️ Common Signs of Failure

• Loose or broken clamp
• Oil mist at hose joint
• Hose movement or chafing
• Overtightening damage

🛠️ Service Notes

• Match the clamp to the hose outside diameter so the band closes well within its working range rather than at the very end of its travel
• Position it over the spigot behind the bead or barb, with the screw where a driver or spanner can still reach it once everything is refitted
• Tighten to seal, not to crush — an over-tightened worm-drive clamp cuts into soft hose and starts the leak you were trying to stop
• Renew clamps when a hose is changed rather than reusing them, and keep band, housing and screw all marine-grade stainless so the clamp does not corrode against itself
• Where two clamps are fitted to one connection, stagger the screw heads and recheck both after the first running period

🔄 Supersession & Cross Reference

Other-Brand OEM Numbers

• VOE21887206

Aftermarket / Verified Equivalents

• Oil separator: 21887256
• Gasket: 20532891
• Hollow screws: 21527800 and 20405562
• Sealing washers: 969011
• Adapter: 21887496
• Adapter: 23006238
• O-ring: 20412359

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging