• 21996779 Spacer Sleeve | Genuine Volvo Penta Part
1 1

21996779 Spacer Sleeve | Genuine Volvo Penta Part

21996779 Spacer Sleeve | Genuine Volvo Penta Part

$48.40 AUD
$48.40 AUD
Sale Sold out
Shipping calculated at checkout.

Available on request — contact us

As an authorised Volvo Penta dealer we can source parts through channels not shown online, and check supersession and used options for you

Availability checked daily with Volvo Penta

✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide

🔧 Product Description

Precision spacer sleeve used in the TAD760VE cooling-system plate and bracket structure. It preserves the required stand-off distance and clamp load between the guard, plate and supporting brackets.

🚤 Compatibility

Typically suits:

  • Volvo Penta TAD760VE
  • Volvo Penta TAD765VE
  • Volvo Penta TAD764VE
  • Volvo Penta TAD763VE
  • Volvo Penta TAD762VE
  • Volvo Penta TAD761VE
  • Engine Family: TAD

⚙️ Key Features

  • Precision length and bore
  • Maintains the specified bracket spacing
  • Supports correct fastener clamp load
  • Prevents component distortion when tightened
  • Exact assembly position is required
  • 8 used per assembly

🔌 Function

Maintains the designed distance and alignment between mounted components while transmitting fastener clamp load.

⚠️ Common Signs of Failure

  • Crushing or deformation
  • Corrosion and loss of length
  • Elongated bore
  • Loose bracket or guard
  • Misalignment after incorrect spacer installation

🛠️ Service Notes

  • A spacer sleeve sets a fixed length in the joint — never leave one out, shorten one, or substitute a stack of washers, or the clamping load and alignment will both be wrong
  • Check that the sleeve is square and fully seated in its counterbore or recess before any fastener is tightened
  • Discard a sleeve that is crushed, bell-mouthed, scored or corroded; a shortened sleeve lets the joint be over-clamped and the component distorted
  • On sleeves in an oil circuit, make sure the bore is clear and that any seal running on the sleeve has a clean, unscored surface to work against
  • Tighten the joint to the figure in the workshop manual for your engine, with the sleeve taking the clamping load rather than the component it protects

🔄 Supersession & Cross Reference

OEM / Related Numbers

  • 22006391 - related brackets
  • 22006394 - related brackets
  • 22006397 - related brackets
  • 22023987 - related plates
  • 22006378 - related plates
  • 22006384 - related plates
  • 21872828 - associated brackets
  • 21872754 - associated brackets
  • 984757 - related flange screw

📦 Condition

  • Genuine Volvo Penta part
  • Brand new
  • Supplied in original or equivalent packaging

Shipping & Delivery

Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.

Returns & Warranty

14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.

Not sure this fits?

Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.

View full details