22011266 Pump | Genuine Volvo Penta Part

🔧 Product Description

High-value engine-mounted pump assembly used in the Volvo Penta installation that specifies 22011266. Pump displacement, drive interface, mounting flange and port arrangement are product controlled.

🚤 Compatibility

Typically suits:

• Volvo Penta D8A5-A MH
• Volvo Penta D8A6-A MH
• Volvo Penta D8A1-A MP
• Volvo Penta D8A3-A MP
• Volvo Penta D8A7-A MP

• Engine Family: D

⚙️ Key Features

• Application-specific displacement and pressure capability
• Factory mounting and drive interface
• Designed for the assigned fluid and operating temperature
• Correct inlet and outlet connections

🔌 Function

Circulates or pressurises the assigned engine fluid system at the flow and pressure required by the original installation.

⚠️ Common Signs of Failure

• Low or unstable system pressure
• Cavitation, whining or bearing noise
• Overheating or inadequate circulation
• Contamination or internal wear debris

🛠️ Service Notes

• Establish why the old pump failed before the new one goes on — debris, a blocked strainer, a starved supply or a dry run will take out the replacement just as quickly
• Fit new gaskets, O-rings and seals on the pump's joint faces and drive, with the faces clean, and use only the sealant the workshop manual for your engine specifies
• Check the drive and the shaft it runs on — coupling, gear, key, belt or drive dog — while access is good, and renew anything doubtful
• Prime or fill the pump as the manual for your engine directs, bleed the system afterwards, and confirm it is actually delivering before the boat leaves
• Tighten mounting and cover fasteners evenly to the manual's figures; pump housings distort easily, and a distorted housing either leaks or binds

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging