• 22047960 O-Ring | Genuine Volvo Penta Part
1 1

22047960 O-Ring | Genuine Volvo Penta Part

22047960 O-Ring | Genuine Volvo Penta Part

$5.85 AUD
$5.85 AUD
Sale Sold out
Shipping calculated at checkout.

In stock — Australian warehouse

Typically reaches our store in 3–5 business days

Availability checked daily with Volvo Penta

✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide

🔧 Product Description

Elastomer sealing ring used in the TAD5 water-pump and thermostat-housing assembly. It seals the pump or cap interface against coolant pressure and temperature cycling.

🚤 Compatibility

Typically suits:

  • Volvo Penta TAD840GE
  • Volvo Penta TAD841-43GE
  • Volvo Penta TAD552VE
  • Volvo Penta TAD853VE
  • Volvo Penta TAD851-53GE
  • Volvo Penta TAD880-82GE
  • Volvo Penta TAD880-84VE
  • Volvo Penta TAD580-83VE
  • Volvo Penta TAD570-72VE
  • Volvo Penta TAD570-71VE-B
  • Volvo Penta TAD550-51VE
  • Volvo Penta TAD540-42VE
  • Volvo Penta TAD840-43VE
  • Volvo Penta TAD850-52VE
  • Volvo Penta TAD870-73VE
  • Volvo Penta TAD840GE-B
  • Volvo Penta TADH880-82GE
  • Volvo Penta TADH880-84VE
  • Volvo Penta TAD840-43VE-C
  • Volvo Penta TAD850-52VE-C
  • Engine Family: TAD, TADH

⚙️ Key Features

  • Correct cross-section and sealing diameter
  • Coolant-, oil- or fuel-compatible elastomer
  • Designed for the original groove compression
  • Resists temperature and pressure cycling
  • Single-use replacement recommended when disturbed

🔌 Function

Forms a pressure-tight seal between mating components and prevents fluid leakage or air entry.

⚠️ Common Signs of Failure

  • External fluid leakage
  • Flattening or permanent compression set
  • Cuts, nicks or pinching during assembly
  • Swelling, hardening or chemical attack
  • Pressure loss or air entry at the joint

🛠️ Service Notes

  • Always fit a new O-ring — never refit one that has been removed, as it has already taken a set in its groove
  • Clean the groove and both sealing faces and check them for nicks, scoring and corrosion pitting; a damaged groove will leak however good the new seal is
  • Smear the ring with a little clean lubricant compatible with the fluid it seals, then roll it into place by hand so it sits untwisted and fully in its groove
  • Never lever an O-ring over a sharp edge or thread with a screwdriver; use a blunt plastic tool and protect any edge the ring has to pass
  • Assemble the joint squarely and tighten to the figure and sequence given in the workshop manual for your engine — over-tightening extrudes the ring and causes the very leak you were curing

🔄 Supersession & Cross Reference

OEM / Related Numbers

  • 22047973 - associated pump
  • 22047982 - associated cap
  • 3836096 - related/earlier cap reference

📦 Condition

  • Genuine Volvo Penta part
  • Brand new
  • Supplied in original or equivalent packaging

Shipping & Delivery

Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.

Returns & Warranty

14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.

Not sure this fits?

Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.

View full details