22060330 Fuel Pipe | Genuine Volvo Penta Part

🔧 Product Description

Factory-bent rigid fuel pipe used in the fuel-pump and fuel-line system of later Volvo Penta V8 gasoline engines. It carries pressurised fuel between the pump, rail or filter connections using engine-specific flare fittings and routing.

🚤 Compatibility

• Engine Family: V
• HP Range: 300-430 HP

Full model list at the end of this description.

⚙️ Key Features

• Precision-formed tube routing
• Correct flare, cone or high-pressure sealing ends
• Maintains stress-free alignment between fuel components
• Material selected for fuel pressure and vibration
• Must match the exact schematic position and serial number

🔌 Function

Transfers fuel between the pump, filter, rail or injector-system components while maintaining a pressure-tight and stress-free connection.

⚠️ Common Signs of Failure

• Fuel staining or leakage at the unions
• Cracks from vibration fatigue
• Flattened, kinked or corroded tube sections
• Pipe stress or misalignment at installation
• Fuel-pressure loss, air ingress or engine performance faults

🛠️ Service Notes

• Work clean: cap or plug every open union and injector as soon as it is disconnected, and fit the new pipe straight from its packaging — dirt introduced at a fuel joint is the most common cause of trouble afterwards
• Offer the pipe up so it lines up on both unions without strain, and never bend, twist or reshape a pipe to make it fit; a pipe that has been sprung into place fatigues and cracks in service
• High-pressure delivery pipes are treated as single-use in workshop practice — the union faces seal by deforming, so refit new pipes rather than reusing them, and tighten to the figure and sequence in the workshop manual for your engine
• Refit all original support clips and brackets in their proper positions so the pipe cannot chafe or vibrate against surrounding parts
• Bleed the system, then check the joints for leaks with the engine running and again once warm — never search for a diesel leak by hand, since fuel at injection pressure will penetrate skin

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta V8-350-C-R, V8-350-CE-R, V8-380-C-R, V8-380-CE-R, V8-430-C-R, V8-300-C-M, V8-300-CE-M, V8-350-C-M, V8-350-CE-M, V8-300-C-N, V8-300-CE-N, V8-350-C-N, V8-350-CE-N, V8-380-C-M, V8-380-CE-M, V8-380-CE-J, V8-380-C-J, V8-430-CE-J, V8-430-C-J, V8-350-C-H, V8-350-CE-H, V8-350-C-J, V8-350-CE-J, V8-300-C-R, V8-300-CE-R, V8-430-CE-R, V8-430-C-M, V8-430-CE-M, V8-300-C-K, V8-300-CE-K, V8-350-C-K, V8-350-CE-K, V8-380-C-K, V8-380-CE-K, V8-430-C-K, V8-430-CE-K, V8-300-C-P, V8-300-CE-P, V8-350-C-P, V8-350-CE-P, V8-380-C-P, V8-380-CE-P, V8-430-C-P, V8-300-CE-G, V8-300-C-G, V8-300-C-H, V8-300-CE-H, V8-300-C-J, V8-300-CE-J, V8-350-C-G, V8-350-CE-G, V8-380-C-N, V8-380-CE-N, V8-430-C-N, V8-430-CE-N, V8-430-CE-P, V8-300-C-S, V8-300-CE-S, V8-350-C-S, V8-350-CE-S