22063539 Power Cable | Genuine Volvo Penta Part

🔧 Product Description

High-current electrical cable for the D11 starting or main-distribution circuit. It is built with factory crimped lugs and insulation suited to engine-room heat, oil exposure and vibration.

🚤 Compatibility

Typically suits:

• Volvo Penta TAD1180-83VE
• Volvo Penta TAD1170-72VE
• Volvo Penta TAD1150-52VE
• Volvo Penta TAD1140-42VE

• Engine Family: TAD

⚙️ Key Features

• Heavy-gauge low-resistance conductor
• Factory-crimped high-current terminals
• Oil-, heat- and abrasion-resistant insulation
• Correct length and lug orientation for safe routing
• System voltage and circuit position must match

🔌 Function

Carries high current between the battery, isolation system, starter motor and main electrical distribution.

⚠️ Common Signs of Failure

• Slow cranking or high voltage drop
• Hot terminals or melted insulation
• Green/white corrosion inside the cable
• Loose or cracked terminal lugs
• Intermittent power loss under vibration

🛠️ Service Notes

• Isolate the battery before disconnecting or routing power cable, and make the battery connection last when refitting
• Keep the run clear of hot surfaces, moving parts and sharp edges, sleeve or grommet it where it passes through a bulkhead, and clamp it along its length so it cannot chafe or swing
• Make up terminations with the correct crimping tool and seal them against moisture; clean the stud and terminal faces to bright metal before assembly
• Tighten terminal nuts firmly without crushing the lug, then protect the finished connection against salt-laden air
• Route power cable away from sensitive signal and sensor wiring where practical, and never leave a length lying in the bilge

🔄 Supersession & Cross Reference

OEM / Related Numbers

• 24122691 - related cover
• 22504359 - related starter element

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging