22094882 Gear Housing | Genuine Volvo Penta Part

🔧 Product Description

Structural gear housing used in a Volvo Penta propulsion or auxiliary gear assembly. It supports shafts, bearings and seals and has been replaced in service by housing 24803673.

⚙️ Key Features

• Machined bearing and seal bores
• Structural gear-train support
• Maintains shaft centre distance and alignment
• Selected by gear assembly and ratio

🔌 Function

Encloses and aligns the rotating gear train while retaining lubricant and supporting bearings and seals.

⚠️ Common Signs of Failure

• Cracks or impact damage
• Bearing bores worn or fretted
• Oil leakage at machined joints
• Gear noise caused by housing misalignment
• Corrosion or damaged mounting threads

🛠️ Service Notes

• A gear housing is a machined case that fixes the position of the shafts and bearings inside it — treat the bearing seats and mating faces as precision surfaces and never dress them with an abrasive, a file or a scraper
• Shim thickness, bearing preload and gear backlash belong to the housing, so they must be re-measured and re-established with the correct measuring tools when a housing is renewed rather than carried over from the old one
• Fit new seals, O-rings and gaskets throughout, and check that oil galleries and any breather or drain passages in the new housing are clear before assembly
• Assemble clean and lubricated with the correct gear oil, tighten the fasteners in the manual's sequence and to its figures, then turn the drive by hand to confirm the gears run freely
• Pressure and vacuum test the assembled drive for leaks before launch, and check the oil level and condition again after the first run

🔄 Supersession & Cross Reference

OEM Supersession Chain

• 22094882 → Superseded by 24803673

OEM / Related Numbers

• 24803673 related reference

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging