22103230 Flywheel | Genuine Volvo Penta Part

🔧 Product Description

Heavy-duty flywheel used on Volvo Penta TAD761VE and related D7 industrial engine installations. It stores rotational energy and connects the crankshaft to the starter ring and driven-equipment coupling.

🚤 Compatibility

Typically suits:

• Volvo Penta TAD765VE
• Volvo Penta TAD764VE
• Volvo Penta TAD763VE
• Volvo Penta TAD762VE
• Volvo Penta TAD761VE

• Engine Family: TAD

⚙️ Key Features

• D7 industrial engine application
• Machined crankshaft mounting face
• Starter ring-gear interface
• Industrial coupling attachment
• Balanced heavy-duty construction
• Engine type: 6-cylinder turbocharged industrial diesel

🔌 Function

Smooths crankshaft speed, enables starter engagement and transfers engine torque to the driven machine.

⚠️ Common Signs of Failure

• Crankshaft flange fretting
• Excessive run-out or vibration
• Cracks around coupling holes
• Loose flywheel fasteners

🛠️ Service Notes

• Inspect the ring gear teeth for chipping, burring and one-sided wear before refitting — a damaged tooth ring will chew up a new starter pinion
• Check the clutch or damper mating face for scoring, heat cracking and blueing, and check the crankshaft rear seal and any spigot bearing while access is good
• Clean the crankshaft flange and the flywheel face so both are dry and free of oil, old sealant and burrs; a trace of oil on that joint is enough to let the flywheel work loose
• Locate the flywheel the correct way round on its dowel or locating feature, and renew the bolts wherever the manual calls them single-use
• Tighten the bolts progressively in a criss-cross pattern to the figure and stages given in the workshop manual for your engine, and never lever against the ring gear teeth to hold it

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging