22184469 Drain Valve | Genuine Volvo Penta Part

🔧 Product Description

Drain valve fitted at schematic key 14 in a Volvo Penta charge-air-cooler assembly. It allows condensate, cleaning fluid or trapped coolant/water to be safely drained from the cooler housing.

🚤 Compatibility

Typically suits:

• Volvo Penta D11C1-A MP
• Volvo Penta D11C3-A MP
• Volvo Penta D11C2-A MP
• Volvo Penta D11C4-A MP
• Volvo Penta D11B3-A MP
• Volvo Penta D11B4-A MP
• Volvo Penta D11B2-A MP
• Volvo Penta D11B1-A MP

• Engine Family: D

⚙️ Key Features

• Corrosion-resistant valve body
• Positive closed sealing under boost/cooling pressure
• Serviceable drain point for maintenance
• Correct thread and sealing interface
• Cooler model and serial number must match

🔌 Function

Provides a controlled low-point drain for condensate or service fluid in the charge-air cooler.

⚠️ Common Signs of Failure

• Persistent leakage or boost loss
• Valve seized open or closed
• Damaged threads or sealing seat
• Corrosion from trapped condensate
• Blocked drain passage preventing moisture removal

🛠️ Service Notes

• Establish what the valve seals against, then drain and depressurise that system before removing it so nothing is lost or spilled into the bilge
• Clean the threads and the sealing face in the housing, fit a new sealing washer or O-ring where one is used, and seal a tapered thread with the product the manual specifies
• Tighten to the figure in the manual while holding the body so the outlet finishes pointing where it needs to for draining, and take particular care in an alloy or plastic housing
• Work the valve fully open and fully shut by hand to check it moves freely and seats, and refit any cap, plug or drain hose the original carried
• Make sure the valve is fully closed and capped before refilling, then run the system and check it for weeps — a drain left cracked open is an easy way to lose coolant or oil at sea

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging