22249775 Fuel Nipple | Genuine Volvo Penta Part

🔧 Product Description

Machined fuel nipple used at fuel-supply connection in a Volvo Penta diesel fuel system. It provides the correct thread, sealing face and hose/pipe interface for the assigned low-pressure fuel connection.

🚤 Compatibility

Typically suits:

• Volvo Penta TAD840GE
• Volvo Penta TAD552VE
• Volvo Penta TAD853VE
• Volvo Penta TAD880-82GE
• Volvo Penta TAD880-84VE
• Volvo Penta TAD580-83VE
• Volvo Penta TAD550GE
• Volvo Penta TAD551GE
• Volvo Penta TAD570-72VE
• Volvo Penta TAD570-71VE-B
• Volvo Penta TAD550-51VE
• Volvo Penta TAD540-42VE
• Volvo Penta TAD840-43VE
• Volvo Penta TAD850-52VE
• Volvo Penta TAD870-73VE
• Volvo Penta TADH880-82GE
• Volvo Penta TADH880-84VE

• Engine Family: TAD, TADH

⚙️ Key Features

• Factory fuel-system thread and bore
• Machined sealing interface
• Diesel-compatible construction
• Matched to a specific supply/return position
• Must be installed with the specified sealing ring or gasket
• Engine type: 11- or 13-litre turbocharged diesel

🔌 Function

Provides the sealed transition between the fuel housing and connected hose or pipe.

⚠️ Common Signs of Failure

• Damaged threads or sealing cone
• Restricted bore
• Loose hose/pipe connection

🛠️ Service Notes

• Work clean on the fuel side and cap the openings while the fitting is out — dirt introduced here ends up at the injection equipment
• Renew the sealing washer or O-ring rather than reusing it, and check the seat and the threads are clean and undamaged
• Tighten to the figure given in the workshop manual for the fitting; a nipple overtightened into an alloy housing distorts the seat and will never seal properly again
• Bleed the fuel system afterwards and check the joint for weeping and for air being drawn in, both with the engine stopped and running

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging