Skip to product information
1 of 1

22264472 Oil Pressure Pipe | Genuine Volvo Penta Part

22264472 Oil Pressure Pipe | Genuine Volvo Penta Part

Regular price $271.55 AUD
Regular price Sale price $271.55 AUD
Sale Sold out
Shipping calculated at checkout.
Quantity

Available on request — contact us

As an authorised Volvo Penta dealer we can source parts through channels not shown online, and check supersession and used options for you

Availability checked daily with Volvo Penta

✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide

🔧 Product Description

Rigid oil-pressure pipe used across defined D5 and D8 lubrication systems, including D8A1-A MP, TAD540-TAD542VE, TAD580-TAD583VE and TAD841-TAD843GE. It connects the oil pump/housing to the pressurised gallery or monitored lubrication circuit.

🚤 Compatibility

  • Engine Family: TAD, D, TADH

Full model list at the end of this description.

⚙️ Key Features

  • Confirmed D5, D8 marine-commercial and D8 generator applications
  • Rigid high-pressure oil construction
  • Factory formed route and fittings
  • Interfaces with oil pump 22015568
  • Matched to oil-pan and strainer versions
  • Engine type: Turbocharged marine-commercial or industrial diesel

🔌 Function

Carries pressurised engine oil from the pump or housing into the engine lubrication gallery.

⚠️ Common Signs of Failure

  • Oil leakage at fittings
  • Fatigue crack or chafing
  • Restricted pipe
  • Damage caused by unsupported vibration

🛠️ Service Notes

  • Keep everything clean and cap the openings while the pipe is off — debris in an oil pressure line reaches a bearing surface
  • Fit new sealing washers to banjo unions and new O-rings where used; a fresh annealed washer seals, a used one usually does not
  • Start both unions by hand and let the pipe find its natural line before tightening; do not spring or bend it to reach, as a strained pipe cracks at the union
  • Refit the original clips and brackets so the pipe cannot vibrate against anything, and tighten unions to the manual figure — overtightening a banjo bolt crushes the washer and the fitting and guarantees a leak
  • Run the engine after fitting, check the unions for weeping and the oil pressure for a normal reading, then recheck when hot

🔄 Supersession & Cross Reference

OEM Supersession Chain

  • 22264472 → Supersedes 21892263

OEM / Related Numbers

  • 21892263 earlier number superseded by this part
  • 22015568 (oil pump)
  • 949658 (O-ring)
  • 21759655 (gasket)
  • 21614255 (oil strainers)
  • 22912621 (oil strainers)
  • 23324776 (oil strainers)
  • 22828303 (oil pans)
  • 23219270 (oil pans)
  • 22859763 (retainer)
  • 21492627 (gasket)

📦 Condition

  • Genuine Volvo Penta part
  • Brand new
  • Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

  • Volvo Penta D8A2-A MP, D8A5-A MH, D8A6-A MH, D8A5-A MG, D8A6-A MG, D8A4-A MP, D8A1-A MP, D8A3-A MP
  • Volvo Penta TAD570-72VE, TAD570-71VE-B
  • Volvo Penta TAD840GE, TAD840-43VE
  • Volvo Penta TAD880-82GE, TAD880-84VE
  • Volvo Penta TADH880-82GE, TADH880-84VE
  • Volvo Penta TAD540-42VE
  • Volvo Penta TAD550-51VE
  • Volvo Penta TAD552VE
  • Volvo Penta TAD580-83VE
  • Volvo Penta TAD850-52VE
  • Volvo Penta TAD853VE
  • Volvo Penta TAD870-73VE

Shipping & Delivery

Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.

Returns & Warranty

14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.

Not sure this fits?

Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.

View full details