22275181 Water Pump Kit | Genuine Volvo Penta Part
22275181 Water Pump Kit | Genuine Volvo Penta Part
Couldn't load pickup availability
Available from Volvo Penta international
Typically reaches our store in 10–14 business days
Availability checked daily with Volvo Penta
✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide
🔧 Product Description
A genuine Volvo Penta engine-coolant circulation pump for selected D5A, D5D, D7A, D7C and related TAD5/TAD7 engines. The belt- or gear-driven pump circulates coolant through the cylinder block, cylinder head, thermostat housing and radiator or heat exchanger. It replaces several earlier Volvo pump references.
🚤 Compatibility
- Year Range: Approximately late 1990s onward; verify pump housing and mounting pattern
⚙️ Key Features
- Genuine Volvo Penta OEM coolant-pump assembly
- Correct Volvo Penta part number 22275181
- Complete pump assembly with integral shaft, bearing, seal and impeller
📋 Kit Contents
- Complete engine coolant-pump assembly - part number 22275181 - quantity 1
- Integral impeller, shaft, bearing and mechanical seal are supplied as part of assembly 22275181 and are not separately serviced in the complete kit
- External mounting gasket, pulley and fasteners are separate unless specifically listed on the sealed Volvo package
🔌 Function
The pump maintains coolant flow through the engine and heat-rejection circuit, controlling component temperature and preventing localised boiling.
⚠️ Common Signs of Failure
- Coolant leakage from the pump seal or weep hole
- Bearing noise or pulley movement
- Engine overheating despite adequate coolant
- Impeller corrosion, erosion or separation
- Incorrect pump casting or mounting pattern selected
🛠️ Service Notes
- Complete coolant pump supplied as a kit; it replaces an earlier pump reference listed for TAD550GE, TAD551GE, TAD750GE and TAD751GE, so check the number against your engine's listing if you are working from an older parts record.
- The pump bolts to the engine against a gasket and a separate drive pulley mounts on it — clean the mating face thoroughly and always fit a new gasket rather than reusing the old one.
- Refit the pulley squarely and check belt alignment, setting tension to the figure given in the workshop manual for your engine.
- Refill with the specified coolant, bleed the system, run up to temperature, then check the pump joint and weep hole for leaks and re-check the level cold.
🔄 Supersession & Cross Reference
OEM Supersession Chain
- 22275181 → Supersedes 21727936 → Supersedes 21404505 → Supersedes 20726077 → Supersedes 20405685
OEM / Related Numbers
- 21727936 earlier number superseded by this part
- 21404505 earlier number superseded by this part
- 20726077 earlier number superseded by this part
- 20405685 earlier number superseded by this part
- 11370468 related reference
- 3801578 related reference
Other-Brand OEM Numbers
- VOE22275181
- Deutz / KHD: 04256959 6959
- Deutz / KHD: 0425 6959
Aftermarket / Verified Equivalents
- SRP: WPK-75181
- LASO: 9820 0147
- Waspo: 354-7701
- FridayParts: FPHD46650171
- Duraforce: replacement pump for 3801578 / 20726077
📦 Condition
- Genuine Volvo Penta part
- Brand new
- Supplied in original or equivalent packaging
Shipping & Delivery
Shipping & Delivery
Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.
Returns & Warranty
Returns & Warranty
14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.
Not sure this fits?
Not sure this fits?
Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.
Share
