22303327 Oil Pan | Genuine Volvo Penta Part

🔧 Product Description

Aluminium engine oil pan used on TAD1371VE through TAD1375VE engines. It supersedes sump 21668618 and incorporates the sealing flange, drain and oil-hose interfaces for the EGR engine installation.

🚤 Compatibility

• Engine Family: D, TAD

Full model list at the end of this description.

⚙️ Key Features

• Exact TAD1371–TAD1375VE fitment
• Supersedes 21668618
• Aluminium sump construction
• Related oil hoses and sealing strip identified
• Factory drain and mounting geometry
• Engine type: 13-litre 6-cylinder turbocharged industrial diesel with EGR

🔌 Function

Stores the engine-oil supply and seals the lower crankcase while supporting the pickup and drain connections.

⚠️ Common Signs of Failure

• Cracked or corroded pan
• Damaged drain threads
• Distorted sealing flange
• Oil-pickup interference

🛠️ Service Notes

• Clean both faces down to bare metal and remove every trace of old gasket or sealant; a hardened ridge will hold the pan off its face and leak
• Check the flange for distortion around the bolt holes — pans are routinely pulled out of shape by over-tightening and will not seal until the flange is flat again
• Fit a new gasket, or apply sealant only where the manual for your engine specifies it; where sealant is used, assemble and tighten within its working time and let it cure before adding oil
• Tighten evenly in stages, working out from the centre, to the figures and sequence in the workshop manual — even tightening matters far more here than force
• Renew the drain plug sealing washer, clean the pickup and strainer while the pan is off, and refill with the grade and quantity specified for your engine before starting

🔄 Supersession & Cross Reference

OEM Supersession Chain

• 22303327 → Supersedes 21329994 → Supersedes 21668618

OEM / Related Numbers

• 21668618 earlier number superseded by this part
• 21329994 earlier number superseded by this part
• 21549296 (oil hose)
• 21549291 (support bracket)
• 21293367 (sealing strip)
• 994451 (flange screw)

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta D13C3-B MH, D13C1-B MH, D13C4-B MH, D13B-E MG, D13B-E MG (FE), D13B-E MH, D13B-E MH (FE), D13B-F MG, D13B-F MG (FE), D13B-N MH, D13B-N MH (FE), D13C1-A MH, D13C2-A MH, D13C1-B MG, D13C3-B MG, D13C2-B MG, D13C4-B MG, D13C2-A MG, D13C1-A MG
• Volvo Penta TAD1341-43GE-B, TAD1341VE, TAD1341GE
• Volvo Penta TAD1344-45GE-B, TAD1344VE, TAD1344GE
• Volvo Penta TAD1342VE, TAD1342GE
• Volvo Penta TAD1343VE, TAD1343GE
• Volvo Penta TAD1345GE, TAD1345VE
• Volvo Penta TAD1350GE, TAD1350VE
• Volvo Penta TAD1351GE, TAD1351-53VE
• Volvo Penta TAD1340VE
• Volvo Penta TAD1346GE
• Volvo Penta TAD1352GE
• Volvo Penta TAD1353GE
• Volvo Penta TAD1354GE
• Volvo Penta TAD1355GE
• Volvo Penta TAD1360-62VE
• Volvo Penta TAD1363-65VE
• Volvo Penta TAD1371-75VE
• Volvo Penta TAD1380-82GE
• Volvo Penta TAD1381-85VE
• Volvo Penta TAD1384-85VE-IWP