22342743 Grommet | Genuine Volvo Penta Part

🔧 Product Description

A genuine rubber or elastomer grommet used to support and isolate a Volvo Penta pipe, cable, panel or bracket. It cushions the supported component, protects it from sharp edges and prevents metal-to-metal vibration damage.

🚤 Compatibility

Typically suits:

• Volvo Penta D8A5-A MH
• Volvo Penta D8A6-A MH
• Volvo Penta D8A5-A MG
• Volvo Penta D8A6-A MG
• Volvo Penta D8A1-A MP
• Volvo Penta D8A2-A MP
• Volvo Penta D8A3-A MP
• Volvo Penta D8A4-A MP

• Engine Family: D

⚙️ Key Features

• Genuine Volvo Penta isolation grommet
• Correct bore, groove and outside diameter
• Protects wiring, hose, pipe or panel from edge damage
• Reduces vibration and noise transfer
• Elastomer selected for the assigned engine environment
• Grommet only; supported component and retainer are separate

🔌 Function

Locates and cushions the assigned component while sealing or protecting the opening through which it passes.

⚠️ Common Signs of Failure

• Cracked, hardened or missing rubber
• Grommet pulls out of the panel
• Wire, hose or pipe chafing
• Rattling or metal-to-metal contact
• Swelling or softening from fluid contamination

🛠️ Service Notes

• Renew the grommet whenever the cable, pipe or shaft it seals is disturbed; old rubber takes a set and will not seal or grip again
• Check that the hole or bore is clean, free of burrs and undamaged — a sharp edge will cut a new grommet
• Ease the grommet in with clean water or the correct rubber lubricant, not with oil, grease or fuel, unless the assembly is oil-wetted by design
• Make sure the grommet is fully home all round with the cable or pipe centred in it, so nothing is left bearing on the edge of the hole

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging