• 22347418 Hose Connection | Genuine Volvo Penta Part
1 1

22347418 Hose Connection | Genuine Volvo Penta Part

22347418 Hose Connection | Genuine Volvo Penta Part

$1,033.54 AUD
$1,033.54 AUD
Sale Sold out
Shipping calculated at checkout.

Available from Volvo Penta international

Typically reaches our store in 10–14 business days

Availability checked daily with Volvo Penta

✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide

🔧 Product Description

A genuine hose-connection body used in Volvo Penta TWD16 generator cooling packages. It provides the formed outlet, mounting interface and sealing locations between the radiator/tank assembly and external coolant hose.

🚤 Compatibility

Typically suits:

  • Volvo Penta D16C-A MG
  • Volvo Penta TWD1643GE
  • Volvo Penta TWD1652GE
  • Volvo Penta TWD1653GE
  • Volvo Penta TWG1663GE
  • Volvo Penta D16C1-E MG
  • Volvo Penta D16C1-F MG
  • Volvo Penta D16C2-E MG
  • Volvo Penta D16C2-F MG
  • Volvo Penta D16C-D MH
  • Volvo Penta TWD1644-45GE
  • Volvo Penta TWD1663GE
  • Volvo Penta D16C1-F MH
  • Volvo Penta D16C2-E MH
  • Volvo Penta D16C2-F MH
  • Volvo Penta TWD1682-83GE
  • Volvo Penta TWD1683GE-B
  • Volvo Penta TWD1672-1673GE
  • Volvo Penta TWD1744GE
  • Engine Family: D, TWD, TWG

⚙️ Key Features

  • Genuine Volvo Penta cooling hose connection
  • Catalogued for TWD1643GE, TWD1652GE and TWD1653GE
  • Correct hose neck and mounting geometry
  • Works with the specified tank, pipe, O-ring and plug
  • Designed for hot pressurised engine coolant
  • Connection only; hose, clamps, seals and tank are separate

🔌 Function

Connects the coolant tank or radiator assembly to the external hose while providing a rigid, sealed flow path.

⚠️ Common Signs of Failure

  • Coolant leakage around the O-ring or hose neck
  • Cracked or corroded connection body
  • Damaged hose bead or sealing groove
  • Loose hose caused by distortion
  • Restricted passage or overheating

🛠️ Service Notes

  • Check the connection and the hose bore are clean and undamaged, and push the hose fully onto the spigot past the bead before clamping
  • Position the clamp on the parallel part of the spigot behind the bead, and tighten it enough to seal without cutting into the hose
  • Renew the O-ring, gasket or sealing washer where the connection screws or bolts into a housing, and check the thread and the seat are clean and dry
  • Support the pipework so the joint is not carrying the load or the pull of the hose — a connection loaded sideways will weep
  • Fill, vent and pressurise the system, then check the joint cold and again at operating temperature, retightening the clamp if it has taken up

🔄 Supersession & Cross Reference

OEM / Related Numbers

  • 22347419 - Associated tank
  • 22347423 - Associated pipes
  • 22347416 - Associated pipes
  • 22347426 - Associated O-ring
  • 22347425 - Associated plug
  • 22075210 - Associated seals
  • 22075211 - Associated seals
  • 22075120 - Associated seals

📦 Condition

  • Genuine Volvo Penta part
  • Brand new
  • Supplied in original or equivalent packaging

Shipping & Delivery

Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.

Returns & Warranty

14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.

Not sure this fits?

Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.

View full details