22347467 Cover | Genuine Volvo Penta Part

🔧 Product Description

A genuine large cooling-package cover or fan shroud used on Volvo Penta TAD1640-TAD1642VE-C engines through serial number 2016108826. It surrounds the radiator fan and directs airflow through the radiator and charge-air cooler. From serial number 2016108826, the updated cover 23176225 is used together with the revised fan-guard arrangement.

🚤 Compatibility

Typically suits:

• Volvo Penta TAD1650VE-B/51VE
• Volvo Penta TAD1643VE-B
• Volvo Penta TAD1640VE-B
• Volvo Penta TAD1641VE-B
• Volvo Penta TAD1642VE-B
• Volvo Penta TAD1641VE
• Volvo Penta TAD1642VE
• Volvo Penta TAD1643VE
• Volvo Penta TAD1660-62VE
• Volvo Penta TAD1662VE EU5
• Volvo Penta TAD1670-72VE
• Volvo Penta TAD1640-42VE-C

• Engine Family: TAD
• Serial Range: SN-2016108826

⚙️ Key Features

• Genuine Volvo Penta radiator/fan-shroud cover
• Catalogued for TAD1640-TAD1642VE-C
• Applies through serial number 2016108826
• Directs fan airflow through the cooling cores
• Provides fan-area guarding and structural enclosure
• Updated serial-range cover 23176225 requires the corresponding revised fan-guard components

🔌 Function

Forms the radiator fan shroud, directing cooling air through the heat exchangers and helping guard the rotating fan.

⚠️ Common Signs of Failure

• Cracks, distortion or broken mounting points
• Fan contact marks
• Reduced cooling airflow and elevated temperatures
• Loose cover or vibration
• Missing seals causing air bypass
• Incorrect early/late cover and fan-guard combination

🛠️ Service Notes

• Clean both sealing faces back to clean metal and check the cover for distortion, cracks or pulled bolt holes before refitting — a warped flange will not seal even with a new gasket
• Where the joint uses a gasket, seal or O-ring, always fit a new one and seat it dry unless the workshop manual for your engine specifies a sealant; never try to make a poor joint tight with extra sealant
• Tighten the fasteners progressively and evenly, working out from the centre, to the figure given in the manual for your engine — pressed steel, alloy and plastic covers distort easily if pulled down hard or unevenly
• If the cover carries a shaft seal or bearing, support it square to the shaft as it goes on so the seal lip is not nicked or rolled over
• Check that any breather, drain or oil return passage in the cover is clear before final tightening, and look for leaks once the engine has been run up to temperature

🔄 Supersession & Cross Reference

OEM Supersession Chain

• 22347467 - Used through SN 2016108826
• 23176225 - Updated cover from SN 2016108827; use with revised fan guard 78467466

OEM / Related Numbers

• 22347468 - Earlier fan ring
• 78467816 - Updated fan ring for revised fan guard
• 78467466 - Revised fan guard used with later cover
• 22837691 - Associated seals
• 3808827 - Associated right and left brackets
• 3808825 - Associated right and left brackets

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging