22348535 Module | Genuine Volvo Penta Part

🔧 Product Description

A genuine Volvo Penta electronic module listed within the ignition and control system. This is an application- and software-specific control component; the hardware number, connector coding, engine product number, serial number and installed software dataset must all be matched before installation. It must not be selected solely by appearance.

⚙️ Key Features

• Genuine application-specific Volvo Penta control electronics
• Designed for CAN-based diesel engine ignition/control architecture
• Factory connector and mounting configuration
• Requires product-number and serial-number verification
• Programming, parameter transfer or dealer commissioning may be required
• Engine type: Electronically controlled Volvo Penta diesel engine

🔌 Function

Receives network and sensor information, processes the assigned engine-control logic and communicates commands and diagnostic information through the Volvo Penta control network. Correct software identity and configuration are essential for starting, protection functions and system communication.

⚠️ Common Signs of Failure

• Engine cranks but does not start
• Intermittent or complete loss of CAN communication
• Active module, power-supply or internal-control fault codes
• Warning lamps, alarms or an inoperative display caused by network loss
• Reduced-power or shutdown protection that remains after wiring and power checks
• Module not recognised after replacement because programming or configuration is incomplete

🛠️ Service Notes

• Isolate the batteries before unplugging or fitting any module, and never disconnect one with the ignition on or the engine running
• Before condemning a module, check its supply, its earth and the harness continuity; a poor earth or a chafed lead gives exactly the same symptoms as a dead unit
• Handle the module by its casing, keep the connector pins clean and dry, and push connectors home squarely until the lock engages — bent or corroded pins cause more trouble than the modules themselves
• Mount it in the original position and orientation using the original brackets or clips, so it stays clear of heat, moving parts and standing water
• Many engine and control modules have to be configured or programmed to your particular engine before they will work correctly, so allow for a Volvo Penta dealer with the correct diagnostic equipment where that applies

🔄 Supersession & Cross Reference

OEM / Related Numbers

• 22348537 - related module variant; not established as interchangeable

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging