22358673 Filter Housing | Genuine Volvo Penta Part

🔧 Product Description

A genuine Volvo Penta lubrication-system filter housing used on the TD420VE and TAD industrial diesel family. The housing provides the correctly machined oil galleries, sealing faces and filter-mounting geometry required to route pressurised engine oil through the specified filter without leakage or restriction. Part number 22358673 is the updated service replacement for 21682041.

🚤 Compatibility

Typically suits:

• Volvo Penta TD420VE
• Volvo Penta TAD620VE
• Volvo Penta TAD650VE
• Volvo Penta TAD660VE
• Volvo Penta TAD720VE
• Volvo Penta TAD721VE
• Volvo Penta TAD722VE
• Volvo Penta TAD750VE
• Volvo Penta TAD420VE
• Volvo Penta TAD520VE
• Volvo Penta TAD760VE

• Engine Family: TD, TAD

⚙️ Key Features

• Exact factory housing for the listed TD420VE/TAD engine models
• Machined internal oil passages maintain the intended lubrication flow path
• Correct filter mounting, thread alignment and gasket/O-ring interfaces
• Designed for industrial diesel vibration, temperature cycling and continuous-duty operation
• Direct genuine replacement for Volvo Penta 21682041
• Engine type: Four- and six-cylinder turbocharged Volvo Penta industrial diesel engines

🔌 Function

Supports the spin-on engine-oil filter and directs pressurised lubricating oil through the filter before distribution to the engine bearings, valve train and turbocharger lubrication circuit.

⚠️ Common Signs of Failure

• Oil leakage around the housing, filter seat or hollow-screw connection
• A filter that will not seat squarely or repeatedly damages its sealing gasket
• Low or unstable oil-pressure indication
• Cracked casting, damaged filter threads or distorted sealing faces
• Oil contamination around adjoining O-ring and adapter connections

🛠️ Service Notes

• This is the current housing for the remote engine-oil filter installation and supersedes the earlier one; both carry the same engine applications, so an engine built with the earlier housing takes this number as its service replacement.
• Renew the O-rings and the sealing gaskets under every hollow screw that is disturbed - the housing seals on soft parts that do not recover once they have been compressed.
• Tighten the housing fixings and the oil connections to the figures given in the workshop manual for your engine; this joint sees full oil pressure.
• Fill the new filter with clean engine oil before fitting where the mounting attitude allows, then run the engine, check the housing and hose joints for leaks with the oil hot, and re-check the level.
• Inspect the feed and return hoses and the mounting bracket while the housing is off - a remote filter installation puts the oil supply through flexible lines that age faster than the housing does.

🔄 Supersession & Cross Reference

OEM Supersession Chain

• 22358673 → supersedes 21682041

OEM / Related Numbers

• 21682041 - previous Volvo Penta filter-housing reference
• 20450992 - associated housing O-ring
• 20405578 - associated O-ring
• 20450993 - associated O-ring
• 20450991 - associated hollow screw
• 3831236 - associated engine-oil filter

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging