22372613 Bracket | Genuine Volvo Penta Part

🔧 Product Description

This genuine Volvo Penta engine-mount / rubber-cushion support bracket is used in the following application: Volvo Penta engine-mounting systems using rubber-cushion kit 3840982. Supports the engine through the specified rubber cushion, maintaining alignment while isolating vibration and absorbing torque reaction.

🚤 Compatibility

Typically suits:

• Volvo Penta D8A5-A MH
• Volvo Penta D8A6-A MH
• Volvo Penta D8A1-A MP
• Volvo Penta D8A2-A MP
• Volvo Penta D8A3-A MP
• Volvo Penta D8A4-A MP

• Engine Family: D

⚙️ Key Features

• Heavy-duty mounting bracket
• Correct geometry for the associated rubber cushion and spacer
• Transfers engine loads into the support structure
• Maintains driveline alignment when correctly installed
• Bracket only; cushion and hardware are separate

🔌 Function

Supports the engine through the specified rubber cushion, maintaining alignment while isolating vibration and absorbing torque reaction.

⚠️ Common Signs of Failure

• Collapsed or separated rubber cushion
• Engine movement during acceleration or load changes
• Misalignment of shaft, drive or driven equipment
• Metal-to-metal contact and increased vibration

🛠️ Service Notes

• Offer the bracket up and start every fastener by hand before tightening any of them, so the component is not pulled into a strained position
• Check the mating faces are clean, flat and free of corrosion scale — a bracket that does not sit flat will work loose and let the component move
• Renew self-locking nuts, lock washers, tab washers or thread-locking compound wherever the original assembly used them, and tighten to the figure given in the workshop manual for your engine
• Where the bracket carries a rubber mount or bush, renew that at the same time rather than reusing a perished one
• On brackets in the inlet and exhaust area, never force alignment to make the holes line up — cure the misalignment at its source, or the bracket and the component it holds will both crack

🔄 Supersession & Cross Reference

OEM / Related Numbers

• 3840982 - associated rubber-cushion / mounting kit
• 847240 - associated spacer sleeve
• 994878 - associated washer

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging