22412202 Oil Dipstick | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta engine oil dipstick for selected D5 industrial engine oil-filling and dipstick assemblies. The calibrated blade provides a direct sump oil-level check and must be used with the matching guide tube, oil-pan orientation and engine installation. A dipstick with a different length or marking position can give a dangerously incorrect oil-level reading.

🚤 Compatibility

Typically suits:

• Volvo Penta TAD552VE
• Volvo Penta TAD580-83VE
• Volvo Penta TAD570-72VE
• Volvo Penta TAD570-71VE-B
• Volvo Penta TAD550-51VE
• Volvo Penta TAD540-42VE

• Engine Family: TAD

⚙️ Key Features

• Genuine calibrated Volvo Penta oil-level gauge
• Designed for the matched D5 dipstick tube and sump geometry
• Provides clear minimum-to-maximum oil-level reference
• Correct handle and sealing geometry for the original guide tube
• Supports routine pre-start and service oil-level inspections
• Must not be substituted by overall length alone
• Engine type: Inline diesel industrial engine

🔌 Function

Extends into the sump through the guide tube and provides the calibrated indication used to confirm whether the engine oil level is within the safe operating range.

⚠️ Common Signs of Failure

• Bent or twisted dipstick blade
• Damaged handle or sealing surface
• Unreadable minimum and maximum markings
• Oil seepage from the dipstick tube
• Inconsistent oil-level readings
• Incorrect reading caused by a mismatched dipstick or guide tube

🛠️ Service Notes

• Check the level with the boat at its normal attitude and by the method given in your engine's operator's manual, wiping the stick clean before taking the reading
• Seat it fully to its stop each time so the marks are read at the right depth, and check the top seal or grommet is sound so the tube stays sealed
• Use the dipstick specified for your engine — length and graduation are matched to that sump, so a near-fit reads high or low
• Replace a stick that is bent, worn smooth at the marks or corroded, and make sure its tube is unobstructed and properly clipped so it cannot vibrate
• Never rely on a single reading if the level looks wrong; wipe, reseat and read again before adding or draining oil

🔄 Supersession & Cross Reference

OEM / Related Numbers

• 20808091 - related oil filler pipe/cap assembly
• 20807510 - oil filler cap
• 20365079 - rubber washer
• 984734 - flange screw
• 22208697 - related hose
• 994562 - hose clamp
• 22633544 - bracket
• 980881 - cable tie
• 11129411 - anchorage
• 944124 - O-ring
• 980833 - dipstick tube

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging