22413350 Gasket | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta upper valve-cover gasket for the D8 industrial and generating-set diesel family. The moulded gasket seals the upper cover to the cylinder-head/rocker-cover assembly, retaining engine oil and excluding dirt and moisture. It is associated with cover reference 22376361 in applicable catalogues and has a different profile from gasket 22413347.

🚤 Compatibility

Typically suits:

• Volvo Penta TAD841-43GE
• Volvo Penta TAD851-53GE
• Volvo Penta TAD880-82GE
• Volvo Penta TAD880-84VE
• Volvo Penta TAD870-73VE
• Volvo Penta TAD840GE-B
• Volvo Penta TADH880-82GE
• Volvo Penta TADH880-84VE

• Engine Family: TAD, TADH

⚙️ Key Features

• Genuine Volvo Penta D8 upper-cover seal
• Moulded oil-resistant material
• Designed for the thermal expansion and vibration of D8 engines
• Profiled to seat in the specified cover groove
• Helps protect rocker gear and valvetrain components from contamination
• Different cover position/design from Volvo Penta gasket 22413347
• Engine type: 8-litre inline-six turbocharged diesel

🔌 Function

Creates the oil-tight upper cover seal over the valvetrain, keeping lubricating oil inside the engine and preventing external contaminants from entering the rocker/valve area.

⚠️ Common Signs of Failure

• Oil leakage or wetness around the upper cover perimeter
• Oil smell or smoke on hot engine surfaces
• Flattened, hardened or cracked gasket sealing lips
• Dirt sticking to the cover joint
• Oil loss between services
• Recurring leakage after correct cover fastener torque

🛠️ Service Notes

• Fit a new gasket every time the joint is disturbed — a gasket takes a permanent set once it has been torqued and will not seal reliably a second time
• Scrape both faces back to clean bare metal, keeping the blade at a shallow angle so it lifts the old material without gouging the surface, and use a plastic scraper on aluminium castings
• Check the faces for flatness, cracks and corrosion pitting, and make sure no old gasket, carbon or hardened sealant is left in the corners or around the bolt holes
• Fit the gasket dry unless the workshop manual for your engine calls for a sealant, and then only the type it specifies — surplus sealant squeezes out into oil, coolant and fuel passages
• Draw the fasteners down progressively in the sequence and to the torque given in the manual for your engine, and recheck after the first heat cycle where the manual asks for it

🔄 Supersession & Cross Reference

OEM / Related Numbers

• 22376361 - related valve cover where catalogued
• 22450719 - related shoulder screw where catalogued
• 22413347 - separate cover-gasket design; not interchangeable

Other-Brand OEM Numbers

• Elring: 935.770

Aftermarket / Verified Equivalents

• MEC-DIESEL: 922554
• Wilmink Group: WG1966870

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging