22472431 Bracket | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta bracket from the Inlet and Exhaust System group, weighing 0.038 kg and listed for 15 applications across TAD and TADH series engines. At 38 grams it is a small clip-type locating bracket, not a load-carrying mount.

🚤 Compatibility

Typically suits:

• Volvo Penta TAD841-43GE
• Volvo Penta TAD552VE
• Volvo Penta TAD851-53GE
• Volvo Penta TAD880-82GE
• Volvo Penta TAD880-84VE
• Volvo Penta TAD580-83VE
• Volvo Penta TAD570-72VE
• Volvo Penta TAD550-51VE
• Volvo Penta TAD540-42VE
• Volvo Penta TAD840GE-B
• Volvo Penta TADH880-82GE
• Volvo Penta TADH880-84VE
• Volvo Penta TAD852VE-B
• Volvo Penta TAD840-43VE-C
• Volvo Penta TAD850-52VE-C

• Engine Family: TAD, TADH

⚙️ Key Features

• 0.038 kg
• Listed for 15 applications across TAD and TADH series engines
• Small locating bracket, not a load-carrying mount
• Inlet and Exhaust System group

🔌 Function

Holds a pipe, hose, cable or sensor at its set position on the inlet and exhaust side, keeping it clear of hot or moving parts and taking vibration out of the run.

⚠️ Common Signs of Failure

• Buzz or rattle from the inlet or exhaust side at certain engine speeds
• The item it holds found loose, moved or resting against something else
• Chafe marks on the hose, pipe or cable it supports
• The bracket cracked at a fold line or around its fixing hole
• Fastener found loose with the hole elongated

🛠️ Service Notes

• Offer the bracket up and start every fastener by hand before tightening any of them, so the component is not pulled into a strained position
• Check the mating faces are clean, flat and free of corrosion scale — a bracket that does not sit flat will work loose and let the component move
• Renew self-locking nuts, lock washers, tab washers or thread-locking compound wherever the original assembly used them, and tighten to the figure given in the workshop manual for your engine
• Where the bracket carries a rubber mount or bush, renew that at the same time rather than reusing a perished one
• On brackets in the inlet and exhaust area, never force alignment to make the holes line up — cure the misalignment at its source, or the bracket and the component it holds will both crack

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging