22552298 Bracket | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta bracket weighing 0.186 kg, listed for six D series engine applications. It is a light locating bracket rather than a structural mount.

🚤 Compatibility

Typically suits:

• Volvo Penta D8A5-A MH
• Volvo Penta D8A6-A MH
• Volvo Penta D8A5-A MG
• Volvo Penta D8A6-A MG
• Volvo Penta D8A1-A MP
• Volvo Penta D8A3-A MP

• Engine Family: D

⚙️ Key Features

• 0.186 kg
• Six D series engine applications

🔌 Function

Locates a light component in position on the engine.

⚠️ Common Signs of Failure

• The component it locates moving or rattling
• Cracks starting at the bolt holes
• Bent or twisted after an impact
• Fixing holes worn oversize

🛠️ Service Notes

• Offer the bracket up and start every fastener by hand before tightening any of them, so the component is not pulled into a strained position
• Check the mating faces are clean, flat and free of corrosion scale — a bracket that does not sit flat will work loose and let the component move
• Renew self-locking nuts, lock washers, tab washers or thread-locking compound wherever the original assembly used them, and tighten to the figure given in the workshop manual for your engine
• Where the bracket carries a rubber mount or bush, renew that at the same time rather than reusing a perished one
• On brackets in the inlet and exhaust area, never force alignment to make the holes line up — cure the misalignment at its source, or the bracket and the component it holds will both crack

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging