22656507 Bracket | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta bracket from the Inlet and Exhaust System group, listed for two TAD series engine applications.

🚤 Compatibility

Typically suits:

• Volvo Penta TAD1371-75VE
• Volvo Penta TAD1170-72VE

• Engine Family: TAD

⚙️ Key Features

• Listed for two TAD series engine applications
• Inlet and Exhaust System group

🔌 Function

Holds an inlet or exhaust component at its designed position, resisting vibration and accommodating the thermal movement of hot pipework.

⚠️ Common Signs of Failure

• Cracking around a mounting hole or at a bend
• Heat discolouration and embrittlement
• Mounting holes worn oval
• Fasteners loosening, or fretting at the joint face
• Exhaust or charge air leaking at an unsupported joint

🛠️ Service Notes

• Offer the bracket up and start every fastener by hand before tightening any of them, so the component is not pulled into a strained position
• Check the mating faces are clean, flat and free of corrosion scale — a bracket that does not sit flat will work loose and let the component move
• Renew self-locking nuts, lock washers, tab washers or thread-locking compound wherever the original assembly used them, and tighten to the figure given in the workshop manual for your engine
• Where the bracket carries a rubber mount or bush, renew that at the same time rather than reusing a perished one
• On brackets in the inlet and exhaust area, never force alignment to make the holes line up — cure the misalignment at its source, or the bracket and the component it holds will both crack

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging