22716058 Bracket | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta bracket from the Inlet and Exhaust System group, weighing 0.276 kg and listed for three TAD series engine applications. At 276 grams it is a light locating bracket rather than a structural mount.

🚤 Compatibility

Typically suits:

• Volvo Penta TAD840GE
• Volvo Penta TAD853VE
• Volvo Penta TAD840-43VE

• Engine Family: TAD

⚙️ Key Features

• 0.276 kg
• Listed for three TAD series engine applications
• Inlet and Exhaust System group
• Light locating bracket

🔌 Function

Holds a pipe, hose or component at its set position on the inlet and exhaust side, steadying it against vibration and keeping it clear of neighbouring parts.

⚠️ Common Signs of Failure

• Rattle or buzz from the inlet or exhaust side at particular engine speeds
• The run it supports found moved or chafing on something nearby
• Cracking at a bend or around a fixing hole
• Fixing hole worn oval, with the fastener found loose
• Heat discolouration on the bracket

🛠️ Service Notes

• Offer the bracket up and start every fastener by hand before tightening any of them, so the component is not pulled into a strained position
• Check the mating faces are clean, flat and free of corrosion scale — a bracket that does not sit flat will work loose and let the component move
• Renew self-locking nuts, lock washers, tab washers or thread-locking compound wherever the original assembly used them, and tighten to the figure given in the workshop manual for your engine
• Where the bracket carries a rubber mount or bush, renew that at the same time rather than reusing a perished one
• On brackets in the inlet and exhaust area, never force alignment to make the holes line up — cure the misalignment at its source, or the bracket and the component it holds will both crack

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging