Skip to product information
1 of 1

22734313 Piston Ring Kit | Genuine Volvo Penta Part

22734313 Piston Ring Kit | Genuine Volvo Penta Part

Regular price $237.38 AUD
Regular price Sale price $237.38 AUD
Sale Sold out
Shipping calculated at checkout.
Quantity

Available from Volvo Penta international

Typically reaches our store in 10–14 business days

Availability checked daily with Volvo Penta

✓ Authorised Volvo Penta Dealer · Genuine Volvo Penta parts · Ships Australia-wide

🔧 Product Description

A genuine Volvo Penta 0.50mm oversize piston-ring set for one cylinder of the Deutz-derived TAD420VE / D4D / D4E engine family. The ring set is matched to a 101.5mm oversize bore and piston. Four kits are required for a complete four-cylinder TAD420VE.

🚤 Compatibility

Typically suits:

  • Volvo Penta TD420VE
  • Volvo Penta TAD420VE
  • Engine Family: TD, TAD
  • Year Range: Approximately late 1990s - 2010s

⚙️ Key Features

  • Genuine Volvo Penta 0.50mm oversize piston-ring kit
  • Correct current Volvo Penta part number 22734313
  • Nominal 101.5mm oversize bore application
  • Complete ring set for one piston
  • Engine type: Volvo Penta / Volvo / Deutz 2012-family turbocharged diesel

📋 Kit Contents

  • 1 × upper compression ring - serviced under 22734313
  • 1 × lower compression ring - serviced under 22734313
  • 1 × oil-control ring assembly - serviced under 22734313

🔌 Function

The compression rings seal combustion pressure, while the oil-control ring meters the lubricating-oil film on the cylinder wall.

⚠️ Common Signs of Failure

  • Blue smoke and high oil consumption
  • Broken or seized piston rings
  • Cylinder bore or piston ring grooves worn beyond specification
  • Standard rings incorrectly installed in an oversize bore

🛠️ Service Notes

  • Check the end gap of each ring in the bore it will run in and compare it with the figure in the workshop manual for your engine; a worn or rebored cylinder changes it
  • Fit the rings the right way up — where a face is marked or the section is stepped, that face goes towards the piston crown, and an oil control ring's expander must be fitted without overlapping its own ends
  • Use a ring expander rather than levering rings on with a screwdriver, and open them only as far as they need to go; cast rings snap and the groove edges nick easily
  • Stagger the ring gaps round the piston as the manual for your engine directs, so that no two gaps line up
  • Oil the rings, bore and compressor lightly, enter the bore with a ring compressor, and never force the piston in — if it resists, back it out and find out why

🔄 Supersession & Cross Reference

OEM Supersession Chain

  • 22734313 → Supersedes 20840002

OEM / Related Numbers

  • 20840002 earlier number superseded by this part
  • 21252233 related standard piston-ring kit
  • 20460013 related piston
  • 20460009 related gudgeon pin
  • 21159226 related snap ring

Other-Brand OEM Numbers

  • VOE22734313
  • Kolbenschmidt: 800057310050
  • Goetze / MAHLE: 10191N2 application cross-reference

Aftermarket / Verified Equivalents

  • ENGITECH: ENT047023 050
  • Perfect Circle: 08-127907-00
  • SRP: PRK-34313
  • Dumper Depot: PRK-002

📦 Condition

  • Genuine Volvo Penta part
  • Brand new
  • Supplied in original or equivalent packaging

Shipping & Delivery

Flat-rate shipping Australia-wide — $14.99 per order, no matter how many parts you add. Orders dispatch from our Kadina, South Australia store. Need it urgently or want to collect in person? Call us on 0412 532 984 before ordering.

Returns & Warranty

14-day change-of-mind returns — if it's not right or you ordered the wrong part, send it back within 14 days in new, unused condition for a refund or exchange. Manufacturer warranties apply to new parts. Full details in our Refunds & Returns policy.

Not sure this fits?

Ask us before you buy — we check part numbers and fitment every day. Call 0412 532 984 (Mon–Fri 8.30am–4.30pm) or message us through the contact page with your engine or vehicle details.

View full details