22820334 Bearing Housing | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta bearing housing from the Marine Propulsion group, weighing 1.142 kg and listed for seven applications across D series engines and IPS pod drives. Its bore condition sets the fit of the bearing it carries.

🚤 Compatibility

Typically suits:

• Volvo Penta D6-300D-G
• Volvo Penta D6-340D-G
• Volvo Penta D6-380D-G
• Volvo Penta D6-440D-G
• Volvo Penta D6-480D-G
• Volvo Penta IPS10-A
• Volvo Penta IPS10-B

• Engine Family: D, IPS
• HP Range: 300-480 HP

⚙️ Key Features

• Bearing housing from the Marine Propulsion group
• 1.142 kg
• Listed for seven applications across D series engines and IPS pod drives

🔌 Function

Carries and locates a bearing, holding its outer race square and concentric so the shaft it supports runs true under load.

⚠️ Common Signs of Failure

• Rumbling, growling or whine from the drive that changes with shaft speed
• Vibration that rises with load rather than with engine revolutions
• Bearing outer race spinning in the bore, leaving polished or scored witness marks
• Housing bore worn oval or stepped, so a new bearing is loose on fitting
• Cracks radiating from a bolt boss or a change of section in the casting

🛠️ Service Notes

• Measure the bore before condemning or reusing the housing, since a bearing failure often takes the housing with it
• Renew the bearing, seals and any O-rings at the same time as the housing
• Check the shaft journal and the mating face for damage before reassembly

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging