22828897 Wiring Harness | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta 5 metre exhaust temperature extension cable, weighing 0.200 kg and listed for 26 D series applications. The 5 m length is critical - 7 m and 9 m versions cover the same installations.

🚤 Compatibility

• Engine Family: D

Full model list at the end of this description.

⚙️ Key Features

• Exhaust temperature extension cable, 5 metres long
• 0.200 kg
• Listed for 26 D series applications
• The 5 m length is what identifies it, with 7 m and 9 m versions covering the same installations

🔌 Function

Extends the exhaust temperature sensor circuit by a fixed 5 metre run, so the sensor at the exhaust can reach its control connection without a spliced joint in the loom.

⚠️ Common Signs of Failure

• Exhaust temperature reading dropping out or reading implausibly
• Fault code for an open circuit on the exhaust temperature signal
• Connector pins corroded green where the plug has sat in damp
• Sheath chafed through or crushed where it passes a bulkhead or bracket
• Broken conductor inside an intact outer cover, shown by continuity testing

🛠️ Service Notes

• Measure the run before ordering, since 5 m, 7 m and 9 m versions all fit the same installations
• Support and clip the cable clear of hot exhaust surfaces, which is what kills these cables first

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta D13C3-B MH, D13C1-B MH, D13C4-B MH, D13C2-B MP, D13C4-B MP, D13C5-B MP, D13C1-A MH, D13C2-A MH, D13C3-B MG, D13C4-B MG, D13C5-A MP, D13C2-A MG, D13C1-A MG, D13C7-B MP, D13C8-B MP, D13C9-A MP
• Volvo Penta D16C1-E MG, D16C1-F MG, D16C2-E MG, D16C1-E MH, D16C1-F MH, D16C2-E MH
• Volvo Penta D8A6-A MH, D8A6-A MG, D8A7-A MP, D8A8-A MP