22864177 Pressure Sensor | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta pressure sensor from the Fuel System group, weighing 0.041 kg and listed for 30 D series engine applications. Its signal feeds fuel system management, so a drifting sensor affects fuelling rather than only a reading.

🚤 Compatibility

• Engine Family: D
• HP Range: 145-480 HP

Full model list at the end of this description.

⚙️ Key Features

• Fuel system pressure sensor
• 0.041 kg
• Listed for 30 D series engine applications
• Its signal feeds fuelling control, not just a gauge reading

🔌 Function

Measures pressure in the fuel system and reports it to the control system, which uses the value to set fuelling.

⚠️ Common Signs of Failure

• Fault codes for fuel pressure with no leak or restriction found
• Power loss, derate or an engine that starts and dies
• Rough running or a hunting idle as the reading drifts
• Diesel weeping around the sensor body or its thread
• Corroded pins or damp inside the connector, found on strip-down

🛠️ Service Notes

• Check the filters, the lift pump and the wiring before condemning the sensor - a genuine low-pressure fault reads the same way as a failed sensor
• Renew the sealing ring on the sensor and tighten to the specified figure, as these bodies distort easily

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta D6-340I-G, D6-380I-G, D6-440I-G, D6-480I-G, D6-300A-G, D6-340A-G, D6-380A-G, D6-440I-WJ-G, D6-480I-WJ-G, D6-300D-G, D6-340D-G, D6-380D-G, D6-440D-G, D6-480D-G, D6-400A-G, D6-440A-G, D6-300I-G, D6-480A-G
• Volvo Penta D4-175I-G, D4-230I-G, D4-270I-G, D4-320I-G, D4-300I-G, D4-150A-G, D4-230A-G, D4-270A-G, D4-320A-G, D4-300A-G, D4-145I-G, D4-175 VG