22890739 Cable | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta CAN cable, 100 m. The Independent Rudder System uses the same CAN signal cable as the trailing pump, and CAN cables are one of the four items needed for a complete IRS installation.

🚤 Compatibility

• Engine Family: D, IPS

Full model list at the end of this description.

⚙️ Key Features

• 100 metre CAN harness cable
• 7 kg
• Listed for 26 applications across D series engines and IPS pod drives
• The 25 metre version 22890741 covers the same installations, so length is the selection detail
• CAN cable, 100 m
• Used by the Independent Rudder System and by the trailing pump
• Length: 100 m
• Type: CAN signal cable

🔌 Function

Carries the CAN bus between the engine, the helm electronics and the drive, so the control units can exchange data and share sensor readings along the length of the boat.

⚠️ Common Signs of Failure

• Instruments, throttle response or warning lamps dropping out together
• Communication or bus fault codes logged at the helm
• Connector pins found green, corroded or backed out
• Outer sheath chafed where the run passes a bulkhead or a clip
• Faults that change when the cable is flexed by hand

🛠️ Service Notes

• Measure the run before ordering - the 25 m 22890741 fits the same installations and is the alternative length
• Check the connectors and the bus terminations before condemning the cable; bus faults usually sit at the ends

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta D13C2-B MP, D13C2-A MP, D13C4-A MP, D13B-L MP, D13B-G MP, D13B-K MP, D13B-C MP, D13C6-A MP, D13C4-B MP, D13C5-B MP, D13C5-A MP, D13C8-B MP
• Volvo Penta D11C2-A MP, D11C4-A MP, D11B4-A MP, D11B2-A MP, D11A-E MP
• Volvo Penta D8A2-A MP, D8A4-A MP, D8A8-A MP
• Volvo Penta IPS15-B, IPS15-A
• Volvo Penta IPS2-C
• Volvo Penta IPS20-D
• Volvo Penta IPS3-C
• Volvo Penta IPS30-D