22906608 Tube | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta tube from the Marine Propulsion group, weighing 0.041 kg and listed for 13 applications across D series engines and TSK units.

🚤 Compatibility

Typically suits:

• Volvo Penta D6-300A-G
• Volvo Penta D6-340A-G
• Volvo Penta D6-380A-G
• Volvo Penta TSK DPI-A
• Volvo Penta D6-400A-G
• Volvo Penta D6-440A-G
• Volvo Penta D4-150A-G
• Volvo Penta D4-230A-G
• Volvo Penta D4-270A-G
• Volvo Penta D4-320A-G
• Volvo Penta D4-300A-G
• Volvo Penta D6-480A-G
• Volvo Penta TSK DPI-A2

• Engine Family: D, TSK
• HP Range: 150-480 HP

⚙️ Key Features

• Tube from the Marine Propulsion group
• 0.041 kg
• Listed for 13 applications across D series engines and TSK units

🔌 Function

Carries fluid between two points in the drive, its shape set by the route it has to take through the housing.

⚠️ Common Signs of Failure

• Weep or drip at an end fitting
• Level dropping in the reservoir the tube feeds
• Tube found kinked, chafed or corroded on inspection
• End flare or fitting cracked where the tube has been vibrating

🛠️ Service Notes

• Fit the tube so it reaches both connections without being sprung into place — a tube pulled into line loads its ends and cracks, usually at a bend or a joint
• Renew the sealing washers, O-rings or gaskets at every connection rather than reusing them, and start each union by hand so you can feel that the thread and seating face are properly engaged before tightening
• Keep the bore clean: cap or plug both ends until the moment of fitting, and never blow debris through a tube into the component it feeds
• Support the tube in its original clips and brackets — an unsupported run will fatigue from engine vibration even though it sealed perfectly when new
• Do not straighten, re-bend or patch a damaged tube; its shape is what gives the correct stress-free fit, and tighten unions only to the figure in the workshop manual for your engine

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging