22925803 Kit | Genuine Volvo Penta Part

🔧 Product Description

A genuine Volvo Penta matched disc service kit used in selected V6 and V8 petrol-engine assemblies. The calibrated internal disc and sealing components are supplied as one package to preserve the specified flow, pressure or valve response.

🚤 Compatibility

• Engine Family: V
• HP Range: 200-430 HP

Full model list at the end of this description.

⚙️ Key Features

• Genuine Volvo Penta petrol-engine disc kit
• Correct Volvo Penta part number 22925803
• Factory-matched internal valve components
• Applies to listed V6 and V8 petrol-engine variants
• Engine calibration and serial number determine compatibility
• Engine type: Volvo Penta modern petrol marine engine

📋 Kit Contents

• 1 × calibrated disc assembly - 22925803
• Matched sealing components - serviced under kit 22925803
• Matched retaining and support components - serviced under kit 22925803
• Individual internal component numbers are not published as a universal service breakdown

🔌 Function

The disc meters or controls the assigned passage inside the engine assembly, maintaining the response specified by the engine calibration.

⚠️ Common Signs of Failure

• Unstable engine operation or incorrect regulated pressure
• Internal leakage through the serviced assembly
• Disc is scored, distorted or contaminated
• Fault code persists after electrical checks
• Incorrect disc revision is installed for the engine calibration

🛠️ Service Notes

• Check the kit contents against the parts list for your engine before you start, and confirm it is the kit specified for your engine's serial number — kit contents change between engine versions
• Lay the contents out and identify every item against the assembly as it comes apart, so nothing is left over at the end
• Use all the new parts supplied and discard the old ones, even where an old item still looks serviceable; the kit is packaged as a complete replacement for what it covers
• While access is open, clean and inspect the mating parts that are not in the kit — new seals, gaskets or wearing parts fitted to a worn housing, shaft or face will not last
• Tighten, set and adjust to the figures given in the workshop manual for your engine, and renew any single-use fasteners or locking devices the kit provides

🔄 Supersession & Cross Reference

Other-Brand OEM Numbers

• VOE22925803

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging

🔎 Full Model Compatibility

Typically suits:

• Volvo Penta V6-200-N, V6-200-C-N, V6-200-CE-N, V6-240-M, V6-240-C-M, V6-240-CE-M, V6-280-M, V6-280-C-M, V6-280-CE-M, V6-280-J, V6-280-CE-J, V6-280-G, V6-280-C-G, V6-280-CE-G, V6-280-C-J, V6-240-N, V6-240-C-N, V6-240-CE-N, V6-280-N, V6-280-C-N, V6-240-CE-K, V6-280-CE-K, V6-200-P, V6-200-C-P, V6-200-CE-P, V6-250-P, V6-250-C-P, V6-250-CE-P, V6-280-P, V6-280-C-P, V6-280-CE-P, V6-200-C-G, V6-200-G, V6-200-J, V6-200-C-J, V6-280-CE-N, V6-200-M, V6-200-C-M, V6-250-O, V6-250-C-O, V6-250-CE-O, V6-240-C-G, V6-240-CE-G, V6-240-G, V6-240-J, V6-240-CE-J, V6-240-C-J, V6-200-R, V6-200-C-R, V6-250-R, V6-250-C-R, V6-250-CE-R, V6-280-R, V6-280-C-R, V6-280-CE-R
• Volvo Penta V8-380-CE-R, V8-300-C-M, V8-300-CE-M, V8-350-C-M, V8-350-CE-M, V8-300-C-N, V8-300-CE-N, V8-350-C-N, V8-350-CE-N, V8-380-C-M, V8-380-CE-M, V8-380-CE-J, V8-380-C-J, V8-430-CE-J, V8-430-C-J, V8-350-C-H, V8-350-CE-H, V8-350-C-J, V8-350-CE-J, V8-430-CE-R, V8-430-C-M, V8-430-CE-M, V8-300-C-K, V8-300-CE-K, V8-350-C-K, V8-350-CE-K, V8-380-C-K, V8-380-CE-K, V8-430-C-K, V8-430-CE-K, V8-300-C-P, V8-300-CE-P, V8-350-C-P, V8-350-CE-P, V8-380-C-P, V8-380-CE-P, V8-430-C-P, V8-300-CE-G, V8-300-C-G, V8-300-C-H, V8-300-CE-H, V8-300-C-J, V8-300-CE-J, V8-350-C-G, V8-350-CE-G, V8-380-C-N, V8-380-CE-N, V8-430-C-N, V8-430-CE-N, V8-430-CE-P
• Volvo Penta 5.7Gi-300-J