22945460 Seawater Pipe | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta seawater pipe from the Cooling System group, weighing 2.223 kg and listed for six D series engine applications. Seawater pipework corrodes internally, so condition inside matters as much as outside.

🚤 Compatibility

Typically suits:

• Volvo Penta D13C3-B MH
• Volvo Penta D13C2-B MP
• Volvo Penta D13C4-B MP
• Volvo Penta D13C6-A MP
• Volvo Penta D13C7-B MP
• Volvo Penta D13C8-B MP

• Engine Family: D

⚙️ Key Features

• Seawater pipe from the Cooling System group
• 2.223 kg
• Listed for six D series engine applications
• Carries raw seawater, so internal condition matters as much as external

🔌 Function

Carries raw seawater through the cooling circuit between the pump, heat exchanger and outlet, keeping the flow contained and correctly routed.

⚠️ Common Signs of Failure

• Salt crust or a green weeping trail at the joints and unions
• Seawater in the bilge below the pipe run
• Cooling performance dropping as internal corrosion narrows the bore
• Pipe wall thinned, pin-holed or flaking internally when cut or inspected
• Fixings and clamps corroded solid

🛠️ Service Notes

• Judge a seawater pipe from the inside as well as the outside, since it corrodes from within and can look sound externally until it lets go
• Renew the o-rings, gaskets and clips at every joint disturbed, and check the anodes in the same circuit
• A leak here floods the engine space, so pressure-check the circuit before leaving the boat unattended

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging