22948734 Spacer Tube | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta spacer tube from the Cooling System group, weighing 0.331 kg and listed for six D series engine applications.

🚤 Compatibility

Typically suits:

• Volvo Penta D13C3-B MH
• Volvo Penta D13C2-B MP
• Volvo Penta D13C6-A MP
• Volvo Penta D13C4-B MP
• Volvo Penta D13C7-B MP
• Volvo Penta D13C8-B MP

• Engine Family: D

⚙️ Key Features

• Spacer tube from the Cooling System group
• 0.331 kg
• Listed for six D series engine applications

🔌 Function

Sets and holds the distance between two components in the assembly, taking the clamping load through its own length so the parts are not pulled together.

⚠️ Common Signs of Failure

• Fixings that will not hold torque at the joint
• The mounted component sitting out of position or under strain
• Spacer found crushed, bell-mouthed or worn short on removal
• Fretting marks at each end where it has been working

🛠️ Service Notes

• A spacer tube sets a dimension — it holds a bearing, bush or bracket at the correct distance, so its length is a functional measurement and nothing may be substituted for it
• Check both ends are square, clean and undamaged before fitting; a burred or bell-mouthed end effectively shortens the spacer and lets the joint relax in service
• Renew any spacer that is crushed, cracked, bowed or heavily scored — a collapsed spacer shows up as a fastener that keeps losing its tightness or a bearing that runs with play
• Fit it the right way round where the ends differ, and make sure it is actually in the joint before the fastener is tightened; nothing in the torque reading will tell you it has been left out
• Tighten the fastener that clamps through it to the figure and sequence given in the workshop manual for your engine

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging