23023264 Cylinder Liner Kit | Genuine Volvo Penta Part

🔧 Product Description

A genuine Volvo Penta matched one-cylinder piston and wet-liner package for the D13C6-A MP 1000HP marine engine. The kit includes the piston, complete ring set, liner, gudgeon pin, retainers and liner seals. Six kits are required for a complete inline-six engine.

🚤 Compatibility

Typically suits:

• Volvo Penta D13C1-A MP
• Volvo Penta D13C2-A MP
• Volvo Penta D13C3-A MP
• Volvo Penta D13C4-A MP
• Volvo Penta D13B-A MP
• Volvo Penta D13B-H MP
• Volvo Penta D13B-G MP
• Volvo Penta D13B-K MP
• Volvo Penta D13B-B MP
• Volvo Penta D13B-D MP
• Volvo Penta D13B-J MP
• Volvo Penta D13B-C MP
• Volvo Penta D13C5-B MP
• Volvo Penta D13C6-A MP
• Volvo Penta D13C5-A MP

• Engine Family: D

⚙️ Key Features

• Genuine Volvo Penta matched piston and wet-liner kit
• Correct Volvo Penta part number 23023264
• Complete individually numbered one-cylinder package
• Configured for the D13C6-A MP 1000HP piston and combustion specification
• Six kits are required for a complete engine
• Engine type: Volvo Penta D13C 12.8L inline six-cylinder common-rail marine diesel
• 6 used per assembly

📋 Kit Contents

• 1 × wet cylinder liner - 20760235
• 1 × piston - 22025769
• 1 × piston ring kit - 21253763
• 1 × oil scraper ring - 20568155, included in ring kit 21253763
• 1 × compression ring - 21251596, included in ring kit 21253763
• 1 × compression ring - 20590309, included in ring kit 21253763
• 1 × cylinder-liner gasket kit - 270950
• 1 × sealing ring - 470190, included in gasket kit 270950
• 1 × sealing ring - 470922, included in gasket kit 270950
• 1 × sealing ring - 21430623, included in gasket kit 270950
• 1 × piston pin - 20540765
• 2 × piston-pin snap ring - 914531

🔌 Function

The wet liner forms the cylinder bore and transfers heat to coolant. The piston and rings seal combustion, control lubricating oil and transmit gas force through the connecting rod.

⚠️ Common Signs of Failure

• Low compression, high blow-by or oil consumption
• Scored, cracked or cavitated cylinder liner
• Piston crown, skirt or ring-land damage
• Coolant leakage past liner seals
• Cylinder dimensions exceed Volvo Penta overhaul limits

🛠️ Service Notes

• Clean the liner seats and the O-ring grooves in the block thoroughly and check them for corrosion pitting or fretting before any liner goes in — a poor seat is the usual cause of a repeat failure
• Measure liner protrusion above the block face dry, without the O-rings fitted, taking readings at several points around each liner and comparing them with the figures in the workshop manual for your engine — and do not try to correct insufficient protrusion by stacking extra rings or shims under the liner flange
• Keep each liner with its own bore position once measured, and fit the O-rings in the order and orientation specified, lubricated as the manual directs
• Fit the liners with an appropriate press or drawing arrangement so they go in square, never by hammering
• Protect the finished bores from rust and knocks until the pistons go in, and never run a new liner against worn or reused rings

🔄 Supersession & Cross Reference

OEM Supersession Chain

• 23023264 current D13C6-A MP 1000HP cylinder-liner kit reference

OEM / Related Numbers

• 20760235 related reference
• 22025769 related reference
• 21253763 related reference
• 20568155 related reference
• 21251596 related reference
• 20590309 related reference
• 270950 related reference
• 470190 related reference
• 470922 related reference
• 21430623 related reference
• 20540765 related reference
• 914531 related reference

Other-Brand OEM Numbers

• VOE23023264

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging