23047102 Cylinder Liner Kit | Genuine Volvo Penta Part

🔧 Product Description

A genuine matched piston-and-wet-liner service package for one cylinder on the TAD1351VE, TAD1352VE and TAD1353VE. Six kits are required for a complete six-cylinder overhaul.

🚤 Compatibility

Typically suits:

• Volvo Penta TAD1351-53VE

• Engine Family: TAD
• HP Range: Approximately 450-550 HP
• Year Range: Approximately 2010s

⚙️ Key Features

• Complete one-cylinder piston and liner package
• Includes ring set, piston pin, retaining clips and liner seals
• Supersedes earlier liner-kit reference 22617772
• One kit required per cylinder
• Piston grade and engine serial must be confirmed
• Engine type: Volvo Penta inline 6-cylinder 12.8-litre industrial diesel

📋 Kit Contents

• Matched piston and cylinder-liner assembly - Volvo Penta 23047102
• Piston ring kit - Volvo Penta 21253763
• Piston pin - Volvo Penta 20569833
• Piston-pin snap rings - Volvo Penta 914531, quantity 2
• Cylinder-liner gasket and sealing kit - Volvo Penta 270950

🔌 Function

The kit restores the piston-to-bore running surface, compression sealing and liner-to-block coolant seal for one cylinder.

⚠️ Common Signs of Failure

• Excessive crankcase blow-by
• Liner scoring, cavitation or cracking
• Coolant leakage past the liner seals

🛠️ Service Notes

• Clean the liner seats and the O-ring grooves in the block thoroughly and check them for corrosion pitting or fretting before any liner goes in — a poor seat is the usual cause of a repeat failure
• Measure liner protrusion above the block face dry, without the O-rings fitted, taking readings at several points around each liner and comparing them with the figures in the workshop manual for your engine — and do not try to correct insufficient protrusion by stacking extra rings or shims under the liner flange
• Keep each liner with its own bore position once measured, and fit the O-rings in the order and orientation specified, lubricated as the manual directs
• Fit the liners with an appropriate press or drawing arrangement so they go in square, never by hammering
• Protect the finished bores from rust and knocks until the pistons go in, and never run a new liner against worn or reused rings

🔄 Supersession & Cross Reference

OEM Supersession Chain

• 23047102 → Supersedes 22617772

OEM / Related Numbers

• 22617772 earlier number superseded by this part
• 23046606 - related complete overhaul kit
• 21253763 - included piston ring kit
• 20569833 - included piston pin
• 270950 - included liner sealing kit

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging