23095840 Kit | Genuine Volvo Penta Part

🔧 Product Description

A genuine emergency-stop switch package for the electrical shutdown unit on selected D8 and D13 commercial marine engines. The button provides a dedicated hard-wired command to stop the engine through the shutdown control circuit.

🚤 Compatibility

Typically suits:

• Volvo Penta D13C3-B MH
• Volvo Penta D13C1-B MH
• Volvo Penta D13C4-B MH
• Volvo Penta D8A5-A MH
• Volvo Penta D8A6-A MH
• Volvo Penta D8A5-A MG
• Volvo Penta D8A6-A MG
• Volvo Penta D8A4-A MP
• Volvo Penta D13C4-B MP
• Volvo Penta D13C5-B MP
• Volvo Penta D13C6-A MP
• Volvo Penta D13C1-A MH
• Volvo Penta D13C2-A MH
• Volvo Penta D13C5-A MP
• Volvo Penta D13C2-A MG
• Volvo Penta D13C1-A MG
• Volvo Penta D8A3-A MP
• Volvo Penta D13C8-B MP
• Volvo Penta D8A7-A MP
• Volvo Penta D8A8-A MP

• Engine Family: D
• HP Range: Approximately 0-550 HP
• Year Range: Approximately 2010s

⚙️ Key Features

• Genuine electrical emergency-stop package
• Includes push button and both specified circuit resistors
• Used with the Volvo Penta shutdown-module wiring
• Designed for commercial and heavy-duty marine installations
• Exact shutdown-unit revision must be confirmed
• Engine type: Volvo Penta D8 or D13 electronically controlled commercial marine diesel

📋 Kit Contents

• Emergency-stop push button - Volvo Penta 23094365
• 2.2kΩ, 3W, 5% resistor - Volvo Penta 21448405
• 360Ω, 3W, 5% resistor - Volvo Penta 22855031

🔌 Function

Pressing the emergency-stop button changes the shutdown-circuit resistance and commands the shutdown module to stop the engine.

⚠️ Common Signs of Failure

• Emergency-stop button does not stop the engine
• Shutdown circuit shows an open or short circuit
• Push button is seized, damaged or water-contaminated
• Resistor value is outside specification
• Shutdown-system fault remains active after wiring checks

🛠️ Service Notes

• Check the kit contents against the parts list for your engine before you start, and confirm it is the kit specified for your engine's serial number — kit contents change between engine versions
• Lay the contents out and identify every item against the assembly as it comes apart, so nothing is left over at the end
• Use all the new parts supplied and discard the old ones, even where an old item still looks serviceable; the kit is packaged as a complete replacement for what it covers
• While access is open, clean and inspect the mating parts that are not in the kit — new seals, gaskets or wearing parts fitted to a worn housing, shaft or face will not last
• Tighten, set and adjust to the figures given in the workshop manual for your engine, and renew any single-use fasteners or locking devices the kit provides

🔄 Supersession & Cross Reference

OEM / Related Numbers

• 23095841 - related shutdown-module override switch kit
• 22954727 - related 11,000mm extension wiring harness
• 23088403 - related diode
• 22754802 - related shutdown control-unit references
• 23288404 - related shutdown control-unit references

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging