23196202 Oil Cooler | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta water-cooled engine oil cooler weighing 9.437 kg. Its fitment is serial-specific, so confirm the engine serial number before ordering. At 9.437 kg it is a two-hand lift, so plan how it will be supported before the last fasteners come out.

⚙️ Key Features

• 9.437 kg
• Water-cooled engine-oil heat exchanger
• Serial-specific fitment - confirm the engine serial number before ordering
• Heavy enough to need supporting during removal

🔌 Function

Passes oil through a cooled matrix so the oil temperature stays within limits under sustained load, holding its viscosity and film strength where they need to be.

⚠️ Common Signs of Failure

• Oil temperature running high, or the oil temperature alarm coming on under load
• Milky emulsion on the dipstick or in the header tank, showing the two circuits have crossed
• Weeping from the cooler body, its end caps or its unions
• Oil or coolant being lost with no leak to be found anywhere else
• Cooler found silted, scaled or partly blocked internally on strip-down

🛠️ Service Notes

• An internal leak contaminates both circuits - flush the oil system and the coolant side thoroughly, then change the oil and filters again after a short run
• Renew all the O-rings, gaskets and end-cap seals rather than reusing them
• At 9.437 kg support the cooler as the last fasteners come out, so its weight is never hanging on a union or a gasket

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging