23232312 Bracket | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta bracket from the Inlet and Exhaust System group, weighing 0.285 kg and listed for a single TAD series engine application. It is the lightest of the ten brackets in this run that carry one TAD application.

🚤 Compatibility

Typically suits:

• Volvo Penta TAD580-83VE

• Engine Family: TAD

⚙️ Key Features

• 0.285 kg
• Listed for one TAD series engine application
• The lightest of the ten single-application TAD brackets listed here
• No superseded numbers - it is a standalone reference

🔌 Function

Supports and locates a component in the inlet and exhaust run so that its joints are not carrying the weight and the vibration.

⚠️ Common Signs of Failure

• Rattle or drumming from the exhaust run at particular engine speeds
• Cracks around the fixing holes or at a weld
• Fixings repeatedly working loose
• Bracket found bent or its mounting face fretted

🛠️ Service Notes

• Offer the bracket up and start every fastener by hand before tightening any of them, so the component is not pulled into a strained position
• Check the mating faces are clean, flat and free of corrosion scale — a bracket that does not sit flat will work loose and let the component move
• Renew self-locking nuts, lock washers, tab washers or thread-locking compound wherever the original assembly used them, and tighten to the figure given in the workshop manual for your engine
• Where the bracket carries a rubber mount or bush, renew that at the same time rather than reusing a perished one
• On brackets in the inlet and exhaust area, never force alignment to make the holes line up — cure the misalignment at its source, or the bracket and the component it holds will both crack

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging