23239795 Wiring Harness | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta alternator-to-starter wiring harness with braided shrink mesh protection, weighing 1.764 kg and listed for 11 TAD series engine applications. The braided sheathing suits it to a high-vibration, high-heat run. It supersedes 21915982.

🚤 Compatibility

Typically suits:

• Volvo Penta TAD1650VE-B/51VE
• Volvo Penta TAD1643VE-B
• Volvo Penta TAD1640VE-B
• Volvo Penta TAD1641VE-B
• Volvo Penta TAD1642VE-B
• Volvo Penta TAD1643VE
• Volvo Penta TAD1650VE
• Volvo Penta TAD1660-62VE
• Volvo Penta TAD1662VE EU5
• Volvo Penta TAD1670-72VE
• Volvo Penta TAD1640-42VE-C

• Engine Family: TAD

⚙️ Key Features

• Alternator to starter wiring harness with braided shrink mesh protection
• 1.764 kg
• Supersedes 21915982
• Listed for 11 TAD series engine applications

🔌 Function

Carries the heavy charging and starting current between the alternator and the starter, the braided sheath protecting the run where it passes heat and vibration.

⚠️ Common Signs of Failure

• Hard starting or no crank at all despite a good battery
• Charging warning with no fault found at the alternator
• Voltage drop measured across the cable under load
• Braid chafed through or the sheath melted where it passes a hot surface
• Terminals discoloured, or an eyelet crimp found loose

🛠️ Service Notes

• Harness 23240766 is the same braided specification at 1.588 kg but covers only two TAD engines - check the fitment before ordering
• The standard unbraided alternative is 23244183
• Clean the terminal posts and torque the connections - a poor joint is what cooks a cable

🔄 Supersession & Cross Reference

OEM Supersession Chain

• 23239795 → Supersedes 21915982

OEM / Related Numbers

• 21915982 earlier number superseded by this part

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging