23252078 Bracket | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta bracket from the Marine Propulsion group, weighing 3.234 kg and listed for 13 applications across D series engines and TSK units.

🚤 Compatibility

Typically suits:

• Volvo Penta D6-300A-G
• Volvo Penta D6-340A-G
• Volvo Penta D6-380A-G
• Volvo Penta TSK DPI-A
• Volvo Penta D6-400A-G
• Volvo Penta D6-440A-G
• Volvo Penta D4-150A-G
• Volvo Penta D4-230A-G
• Volvo Penta D4-270A-G
• Volvo Penta D4-320A-G
• Volvo Penta D4-300A-G
• Volvo Penta D6-480A-G
• Volvo Penta TSK DPI-A2

• Engine Family: D, TSK
• HP Range: 150-480 HP

⚙️ Key Features

• Bracket from the Marine Propulsion group
• 3.234 kg
• Listed for 13 applications across D series engines and TSK units

🔌 Function

Carries and locates a component of the drive installation, taking its load and the vibration so its own mountings are not overloaded.

⚠️ Common Signs of Failure

• Movement or vibration at the component it carries
• Cracks around the bolt holes or along a weld line
• Corrosion at the mounting face in a wet bilge
• Fasteners repeatedly working loose, or the mounting face fretted bright

🛠️ Service Notes

• Offer the bracket up and start every fastener by hand before tightening any of them, so the component is not pulled into a strained position
• Check the mating faces are clean, flat and free of corrosion scale — a bracket that does not sit flat will work loose and let the component move
• Renew self-locking nuts, lock washers, tab washers or thread-locking compound wherever the original assembly used them, and tighten to the figure given in the workshop manual for your engine
• Where the bracket carries a rubber mount or bush, renew that at the same time rather than reusing a perished one
• On brackets in the inlet and exhaust area, never force alignment to make the holes line up — cure the misalignment at its source, or the bracket and the component it holds will both crack

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging