23258086 Bracket | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta bracket weighing 0.852 kg, listed for four TAD series engine applications.

🚤 Compatibility

Typically suits:

• Volvo Penta TAD1640VE-B
• Volvo Penta TAD1641VE-B
• Volvo Penta TAD1642VE-B
• Volvo Penta TAD1660-62VE

• Engine Family: TAD

⚙️ Key Features

• Mounting bracket
• 0.852 kg
• Listed for four TAD series engine applications

🔌 Function

Locates a component on the engine and holds it steady against vibration and its own weight.

⚠️ Common Signs of Failure

• Buzzing or knocking that changes with engine speed
• The mounted component moving or sitting out of position
• Cracks around the fixing points
• Bolt holes worn oval
• Fretting or bright rub marks at the mounting face

🛠️ Service Notes

• Offer the bracket up and start every fastener by hand before tightening any of them, so the component is not pulled into a strained position
• Check the mating faces are clean, flat and free of corrosion scale — a bracket that does not sit flat will work loose and let the component move
• Renew self-locking nuts, lock washers, tab washers or thread-locking compound wherever the original assembly used them, and tighten to the figure given in the workshop manual for your engine
• Where the bracket carries a rubber mount or bush, renew that at the same time rather than reusing a perished one
• On brackets in the inlet and exhaust area, never force alignment to make the holes line up — cure the misalignment at its source, or the bracket and the component it holds will both crack

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging