23268324 Wiring Harness | Genuine Volvo Penta Part

🔧 Product Description

Genuine Volvo Penta 7000 mm post-SCR NOx sensor harness, weighing 0.606 kg and listed for 17 applications across D, TAD, TWD and TADH series engines. It is the longest of the four and suits the most remote aftertreatment installations.

🚤 Compatibility

Typically suits:

• Volvo Penta D13C3-B MH
• Volvo Penta D13C4-B MH
• Volvo Penta D8A6-A MH
• Volvo Penta TAD880-84VE
• Volvo Penta TAD1180-83VE
• Volvo Penta D13C5-B MP
• Volvo Penta D13C1-A MH
• Volvo Penta D13C2-A MH
• Volvo Penta TAD580-83VE
• Volvo Penta D13C3-B MG
• Volvo Penta D13C4-B MG
• Volvo Penta D13C2-A MG
• Volvo Penta D13C1-A MG
• Volvo Penta TWD1682-83GE
• Volvo Penta TWD1683GE-B
• Volvo Penta D13C8-B MP
• Volvo Penta TADH880-84VE

• Engine Family: D, TAD, TWD, TADH

⚙️ Key Features

• 7000 mm long
• Post-SCR NOx sensor harness
• 0.606 kg
• Listed for 17 applications across D, TAD, TWD and TADH series engines
• The longest of the four lengths, for the most remote aftertreatment installations
• L=7000mm (Volvo assembly listing)

🔌 Function

Connects the post-SCR NOx sensor and its module into the engine loom over a long run, carrying the sensor's supply and returning its signal to the engine management.

⚠️ Common Signs of Failure

• Aftertreatment fault codes and a derate
• Signal dropping out as the machine works or as it warms up
• Corrosion in a connector at the exposed end of the run
• Outer sheath chafed or heat-damaged along the routing
• Conductor fractured inside the loom, showing only under flex

🛠️ Service Notes

• A long run needs proper support along its whole length; unclipped sections are where these harnesses fail
• Order by the measured routing - the same sensor position is covered by 1000, 3000, 5000 and 7000 mm harnesses
• Rule out the sensor, its module and the connector pins before replacing the loom

📦 Condition

• Genuine Volvo Penta part
• Brand new
• Supplied in original or equivalent packaging